B2400 starting problem finally solved

[ktmhans]

Just letting you know. This fix is the best.its been over a week and has worked every time. So easy. After 900 hours the tractor is starting faster and stronger then ever. I finally fix something that I've been dealing with for over 10 years just to sell it. I even put the old starter back in. So if anyone is looking for a new starter that fits a b 2100 and probly more give me email. Ktmhans@yahoo.com thanks for all the help. My part was up to $32 now but no worries.

 

[OhioTractorGuy]

My B2400 was displaying the same symptoms, clicking, but not cranking. I installed the JD kit and like magic, it's working great.

Thank you to all the great contributors to this site!!!

 

[Kanook]

My B1700 and JD f535 experience the same symptoms.....click...click...click...click...click...start. New batteriers etc haven't solved the issue. I'll be heading to the JD dealer to pick up a couple of these relays..Thanks for the posts...I should have checked this thread out 2 years ago.:thumbsup:

 

[Bluelick]

So, I have to ask, since the John Deere part is now up to $32 according to recent posts, and Kenmissouri did it with a $3.99 part from AutoZone, does anyone have the AutoZone part number? Ken or others? And info on installing the AutoZone relay?

http://www.tractorbynet.com/forums/kubota-owning-operating/76867-kubota-b2400-starter-fix-fuel.html

Thanks!

 

[Kanook]

I would guess that any 12vdc relay that will handle the solonoid current draw would suffice.

 

[2006LJRubicon]

Going to try this in the morning, thanks to all posters!

 

[avgguy]

Thanks ! ! ! I own a 97 B2400, same problem ...... installed relay as stated on this great site ! ! ! Been about 2 years now.. no problems. Thanks again for posting, Kubmech and others. Much appreciated ! ! !

 

[OhioTractorGuy]

I just did this fix on my ZD28F which was acting like it's barn sibling B2400 a few years ago. $30 and about 10 minutes later, she cranked over on the first try. Thanks yet again to TBN folks!!

 

[tinab]

can someone draw me a picture of how to fix this, really, I don't know anything, and need to fix my tractor, it is Kubota G1900s, only starts when it wants to, do I disconnect any wires, where do i run the new wires to?? sorry i really am a beginner...

 

[tinab]

Here is a link to Kubmech's post.
Click Here
Sure is great to have him post. /forums/images/graemlins/smile.gif

I can not get this link to work, does anyone now where this info is? thank you