LD1
Epic Contributor
Here is a barn pads I stripped back on may 31....bought 2.5 weeks into a drought.
Anyone used a tiller to remove topsoil for driveway?
- Thread starter ShowroomShine
- Start date
- Views: 6169
bigtiller
Super Member
- Joined
- Feb 1, 2006
- Messages
- 7,225
- Location
- central Iowa
- Tractor
- John Deere 2720 John Deere 3039R John Deere Z545R
Tilling it first will speed up decomposition.
I had a nice crop of bluegrass where my tin shed was to be built so I tilled and remove about 6" to get most of the vegetation. The 2 big piles of sod & soil decomposed and when the building was finished, the soil was easy to work with for grading.
I had a nice crop of bluegrass where my tin shed was to be built so I tilled and remove about 6" to get most of the vegetation. The 2 big piles of sod & soil decomposed and when the building was finished, the soil was easy to work with for grading.
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 16,585
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
You might want to mow a couple of weeks in advance before tilling, to help decomposition.
With that much material, 750 ft of driveway, I like LD1's advice to windrow the loose material to each side with an angled blade instead of scooping it.
With that much material, 750 ft of driveway, I like LD1's advice to windrow the loose material to each side with an angled blade instead of scooping it.
Yep. 4 inches of soil off an 11 foot wide driveway adds up fast; about 100 yards of loam off the 750 feet.
Not that anybody asked...
OP
ShowroomShine
Gold Member
Hmm good point. I was going to use my 75C tractor to scoop up the soil but that’s about 75 trips back and forth lolYep. 4 inches of soil off an 11 foot wide driveway adds up fast; about 100 yards of loam off the 750 feet.
Not that anybody asked...
