Anyone have a JD 4600 / 4700 with creeper gear?

[Industrial Toys]

Different tractor, 6000 series. But I kick myself that I didn't add creeper gears when I replaced the transmission a while back. Hydrostat is one thing, but as for gears, you can never have enough of them.

 

[beenthere]

Here is a schematic of the operation of the creeper gear.. so if you can figure out if it is in the tranny, and how to move it with your lever, you may have success..

 

[Zebrafive]

Maybe this will help. This is the transmission case, left side. D = Differential Lock. G = Gear shift. R = Range shift. C = Creeper shift

 

[beenthere]

Can add to Zeb's post, the creeper shift mechanism..

 

[beenthere]

And the creeper control shifter . Hoping the OP is getting some help from this. Maybe we'll hear back.

 

[PsRumors]

Great!!! Thanks guys. I'll compare to my trans tomorrow and report back

 

[rmonio]

Interesting. While I have the HST version of the 4600, I would be interested in what the Creeper gear would do for you?

 

[PsRumors]

Maybe this will help. This is the transmission case, left side. D = Differential Lock. G = Gear shift. R = Range shift. C = Creeper shift

Thanks. It doesnt appear the creeper is in there.

Interesting. While I have the HST version of the 4600, I would be interested in what the Creeper gear would do for you?

Tilling mainly, and just to have it

 

[Zebrafive]

Thanks. It doesnt appear the creeper is in there.



Tilling mainly, and just to have it

Do you have just the shaft coming out of the transmission case? Or also the linkage and lever?