Anyone has the technical manual for 1999 John deere 5510 ?

   / Anyone has the technical manual for 1999 John deere 5510 ? #1  

patrocle

New member
Joined
May 24, 2018
Messages
7
Location
West Coast
Tractor
1999 John Deere 5510
I was looking for the complete technical pdf manual for 1999 John Deere 5510
with 4.5dsl engine. We do have a mowing arm attachment and trying to figure
out what all do and how to adjust or trouble shoot few problems while operating.

Appreciated for any help!

Thanks
 

Attachments

  • 2022-03-11_17-15-08.jpg
    2022-03-11_17-15-08.jpg
    748.1 KB · Views: 74
  • 2022-03-11_17-16-17.jpg
    2022-03-11_17-16-17.jpg
    483 KB · Views: 70
Last edited:
   / Anyone has the technical manual for 1999 John deere 5510 ?
  • Thread Starter
#2  
Anyone? Thanks!
 
   / Anyone has the technical manual for 1999 John deere 5510 ? #3  
If the problem is with the mower control valve, the tractor manual won’t help. If you can provide mower make and model, as well as what problem you are having, maybe someone can help.
 
   / Anyone has the technical manual for 1999 John deere 5510 ? #4  
If your problem(s) is/are tractor related, I have Tech Manual. It's huge, about 4" thick.
 
   / Anyone has the technical manual for 1999 John deere 5510 ? #5  
can help with that, check your messages
 
   / Anyone has the technical manual for 1999 John deere 5510 ? #7  
manual links on the way shortly

Joe
 
   / Anyone has the technical manual for 1999 John deere 5510 ? #8  
Yea, the tech manual won't be any help for that valve assembly. That's part of the boom mower. I have a tech manual for a 5310 which is a bit different creature.
 
   / Anyone has the technical manual for 1999 John deere 5510 ?
  • Thread Starter
#10  
I did some more research and is a "Tiger Mower Cheetah Boom, exactly like this:
2022-03-18_19-14-46.jpg
I did find some pdf here:
and there is a little info on the hyd valve bank but not that much.
More manuals pdf here

My problem is that i am having some problems after mowing for few hours, and the arm will not go from rear of the tractor to the front while activating the control on the joystick to go forward. It takes about anywhere 25-40 seconds and then it starts to move really slow... Or even when i let the controller go the arm keeps going and stops later.

Thanks,
 
 
Top