Those are 'pretty' along side large numbers of locusts I had to deal with in pastures on in long ignored Sangamon River bottom pasture in IL. 3"+ and hard as nails. Once in a tire and kiss a tube goodby - they just keep working deeper. Bought a trackloader to deal with them, then a track skidsteer to mow the pastures.Water locust thorny trees! I am concerned about getting flats on the Mahinda 5010 tractor while clipping the pasture. Or my truck while riding through! Now and far into the future, but not sure how much the latter is a concern. It's because of what we always called Water Locust trees, incredibly thorny monsters. These things have thousands of thorns several inches long that are like nails, like super big hypodermic needles. If you've never seen one, check the image at the bottom. Growing up on the farm, we had to bushhog the pastures and we'd get flats from these thorns. So, what to do. How do you get rid of these? I could hire a forestry mulcher that has tracks and he could certainly do it. But how long would you need to not drive in that spot!
A couple of years ago in this same pasture, we cut some in the open pasture with a chainsaw and polesaw and carefully stacked every single limb and made brush piles. I am now going to burn those and hope every thorn burns! But I now need to clear a heavily infested spot, dozens of trees to reclaim that part of the pasture. What is the best method is the question. And also how long these thorns can remain a pest. Like, many years before they rot?
These trees are beautiful trees otherwise and make a great conversation topic; I would like to save a couple of the more picturesque ones but I worry about them shedding a limb here and there and... flats. The trees also makes great firewood but dealing with the massive thorn clusters, yikes. I suppose that these trees are cousins of the honey locust tree. I wish they were just black locust or the thornless honey locust variety.
The first time we girdled trees, we had the same experience. My dad did it with my brother in law. I went back with him the following winter and I made 2 cuts 4" to " apart and went the full depth of the bar. All but 26 out of 28 of those trees died as anticipated. The 2 that survived had grown together and I didn't do a plunge cut between them like I should have. On smaller trees, it seems like it would be hard to cut deep enough without cutting so deep that the tree comes down early and makes a big mess out of everything.
Rent/hire an excavator to clear them out and pile them all for burning. Steel treads, operator in a safety cab. Once cleared use a bush hog to keep them down.Water locust thorny trees! I am concerned about getting flats on the Mahinda 5010 tractor while clipping the pasture. Or my truck while riding through! Now and far into the future, but not sure how much the latter is a concern. It's because of what we always called Water Locust trees, incredibly thorny monsters. These things have thousands of thorns several inches long that are like nails, like super big hypodermic needles. If you've never seen one, check the image at the bottom. Growing up on the farm, we had to bushhog the pastures and we'd get flats from these thorns. So, what to do. How do you get rid of these? I could hire a forestry mulcher that has tracks and he could certainly do it. But how long would you need to not drive in that spot!
A couple of years ago in this same pasture, we cut some in the open pasture with a chainsaw and polesaw and carefully stacked every single limb and made brush piles. I am now going to burn those and hope every thorn burns! But I now need to clear a heavily infested spot, dozens of trees to reclaim that part of the pasture. What is the best method is the question. And also how long these thorns can remain a pest. Like, many years before they rot?
These trees are beautiful trees otherwise and make a great conversation topic; I would like to save a couple of the more picturesque ones but I worry about them shedding a limb here and there and... flats. The trees also makes great firewood but dealing with the massive thorn clusters, yikes. I suppose that these trees are cousins of the honey locust tree. I wish they were just black locust or the thornless honey locust variety.
You dont need herbicides to deal with the pop ups. Just mow them they wont come back. We have many honey and black locusts.
IF Tordon RTU is still available it will kill them if you can get close enough to inject it. I have a friend who spent time in India with the Peace corps and had the same problem with giant thorns in the tractor tires.Nasty trees.If I had those things it would be WAR. Maybe cut and burn and get the neighbor's excavator to rip out whats left?
I retired from highways. They would foam their front tires. The problem is the only way to remove/ replace the tire is to cut the tire and foam. A really nasty job.Water locust thorny trees! I am concerned about getting flats on the Mahinda 5010 tractor while clipping the pasture. Or my truck while riding through! Now and far into the future, but not sure how much the latter is a concern. It's because of what we always called Water Locust trees, incredibly thorny monsters. These things have thousands of thorns several inches long that are like nails, like super big hypodermic needles. If you've never seen one, check the image at the bottom. Growing up on the farm, we had to bushhog the pastures and we'd get flats from these thorns. So, what to do. How do you get rid of these? I could hire a forestry mulcher that has tracks and he could certainly do it. But how long would you need to not drive in that spot!
A couple of years ago in this same pasture, we cut some in the open pasture with a chainsaw and polesaw and carefully stacked every single limb and made brush piles. I am now going to burn those and hope every thorn burns! But I now need to clear a heavily infested spot, dozens of trees to reclaim that part of the pasture. What is the best method is the question. And also how long these thorns can remain a pest. Like, many years before they rot?
These trees are beautiful trees otherwise and make a great conversation topic; I would like to save a couple of the more picturesque ones but I worry about them shedding a limb here and there and... flats. The trees also makes great firewood but dealing with the massive thorn clusters, yikes. I suppose that these trees are cousins of the honey locust tree. I wish they were just black locust or the thornless honey locust variety.
Was it a "knock off" grubber or the real thing? I posted a pic of both sizes of the real thing. If you were able to bend either you must have driven over it. I've used them to pull small trees and trees up to about 1 1/2" or a bit over. I placed a bar between my rear lift arms, hook a chain to bar and loop on grubber, set jaws on grubber as deep and low to ground as i could, then lift. I hooked into a couple of trees that made the front wheels come off the ground. Not pleasant.
)The guy on Facebook needs his butt kicked.
Maybe we have a different variety. You mow the ones here and you spread thorns. The thorns
