Has anybody seen the 2525 yet... not the ES25... Just curious if any of you dealers have taken delivery yet and what you think?.... I am 99% sure I want one but it's been two months waiting for one to show up at the dealer. Is everybody else in the same boat? Are their late problems or what is Mahindras hold up? Just curious and anxious to see one... for the $11500 it is suppose to be quite a tractor.
Anybody seen the 2525 yet?
- Thread starter grfok
- Start date
- Views: 10001
UncleBuck01
Silver Member
Is this it ?grfok said:
NEW MAHINDRA 2525 STANDARD 4-WHEEL DRIVE TRACTOR -Bill's tractor in Texas
Have not personally seen one yet
sseelhoff
Veteran Member
My dealer called-he finally got his February allotment in this week. Have not been able to see it yet, but should be able to get by in the next week to test drive. Will update everyone, and take some pictures.
Savagepike
Bronze Member
Just curious but doesn't a 98.7 ci diesel normally put out 30+hp? I'm wondering if it's underrated or de-tuned. At an operating weight of 1000lbs more than my 2615, that's some serious beef for the same relative hp. I'm also confused by Mahindra's site stating "Category 2 with telescopic check chains for lower links" in the description. Is it really cat2 at 25hp? Seems odd...
The Mahindra website is a bit innacurate. Bills Tractors specs on the 2525 match the brochure I got from my dealer. Yes it was a derated 30+ hp diesel.. as I was told it was to meet US EPA requirements. The hitch is a Cat 1 acording to the brochure.
I am very anxious to see this tractor I think it will be a lot of tractor for the $$
I am very anxious to see this tractor I think it will be a lot of tractor for the $$
sseelhoff
Veteran Member
The dealer's February 2525 allotment finally arrived, and it was one tractor (as opposed to the 8 he was expecting) Since I had reserved one during the first week in February, I got first dibs on this one Will be doing side by side comparison of 2525 and 2615 on Saturday morning. I will be leaving the dealership with one of these, and it all depends upon the quality of the 2525. I'll give it some leeway due to price point between the units. if its built well enough, I'll get it. If not, 2615 goes home with me. It's a win/win.
Thanks for the info, I look forward to hearing your opinion, I guess my dealer may be getting some soon then also... I too have dibs on the first one and planned the same comparison. The 2615 is a bit more $ and less lifting capacity and weight than the 2525 so I'm anxious to hear what your opinion is.
Thanks
Thanks
EFC
Veteran Member
We have assembled and sold 4 of the 2525's so far. Light years ahead of anything we have ever seen from China (not really a Chinese tractor anyway since a fair amount of the parts are from elsewhere). No problems so far. Not really comparable with the 2615 though, completely different animal.
Buck
Buck
AchingBack
Elite Member
That gives me a peaceful easy feeling. I would not like to know I paid more for less tractor than I have now.EFC said:
sseelhoff
Veteran Member
Looked at the 2525 on Saturday. That's about all I could do with it. We got to the dealership about 8:30, and it was us and the General Manager. His sales staff was still in Vegas for the New Holland Trade Show. He came back early to man the store on Saturday. He sold two $200K excavators while he was there that morning, so not a bad way to spend a Saturday. And he did stay in Vegas long enough to catch the Sarah Evans concert, so he was happy.
Anyway, on to the 2525. Someone had left the key in the unit over night. Tractor would not start. We tried everything, including a jump start off his truck. Couldn't even get the lights, hazards, anything electrical, to come on. No crank at all after. This was more than a dead battery issue. Checked all of the electrical connections. Everything was in neutral, no seat belt interlock, kill switch was in the proper position. Nothing. Very disappointing. This is my 4th visit to the dealership to buy a tractor, and we have yet to make a purchase. GM called his regular salesman, who was still in Vegas for the New Holland show to find out how to start the darn thing. No luck there. After messing with it for nearly an hour, we never did get it running. And I did get to play in the dirt and get greasy, just not the way we intended. But we know it started at some point, because they drove it off the truck when it was delivered to the lot. Weird. Bad Omen?
ANYWAY, here are my observations:
Tractor quality is OK. I use that in the relative sense, as in "just ok" compaired to the 2615. The deck did not feel as rigid as the 2615 in a few spots toward the front, almost spongy. It does have a rubber mat covering, as opposed to the 2615, which does not. But that was not the difference. It was almost as if it was loose under the matting. But it was one solid piece, so that's not it. Just thinner material or not welded as securely?
FEL is not quick attach. No bucket level indicator. Looks like FEL will be a major pain in rear to remove and store. Engine access is much easier than 2615, with lift up hood, as opposed to hood and dropped sides on 2615. Brush guard on front is easy to drop for engine access. Tool box and cup holder are a bit of a joke, IMO, located on the fenders behind the seat. Tool box is not as big of an issue, since you won't be using tools and driving at the same time. It is small. Not much you can put in there. Cup holder-you have to twist around to reach it. Why bother? Better off getting one of those hardhats with the tubing that comes down to your mouth. At least that will hold two drinks.
Seat on the 2525 is spring loaded, which I imagine would take up alot of bounce from uneven ground and vibration. Seat has armrests, too. Dash is easy to read, and has guages and warning lights for everything, including PTO. Control layout seemed a bit awkward compared to the 2615. Throttle down low, and Shuttle Shifters for Forward/Reverse on the left side of the console, and gear selection on the right side of console. Not having gotten to actually drive it, not sure how this might play out in actual usage. PTO and FWD/RWD on the side, which seems normal to me.
Bucket is operated with joystick control, and has automatic float.
Package deal for tractor with FEL, 5' American cutter and 5' box blade is about $13,000(?)
Interesting note. While we were there, another couple came in specifically to see the 2525. This guy had been looking at gray market tractors in the area, and heard about the 2525. He dropped the gray market idea in favor of used when he saw the price on the 2525, terms, and warranty. Mahindra is going to sell alot of these units. Price point is good, and for the weekend warriors like myself and this guy, who are not going to be power users, they do make sense.
Still not buying until I drive it. They have set up a pile of dirt on the yard for buyers to compare not just feel, but actual bucket operation, etc..... I am hoping they can get this thing started today or tomorrow, then I'll go back over and play in the dirt for awhile and HOPEFULLY make a purchase. These guys must love their Mahindras-They sure are making me work to buy one.
Not trying to bag on the dealer. They have been very pleasant to deal with, and have not been doing the pushy hard sell, that I hate.
Anyway, on to the 2525. Someone had left the key in the unit over night. Tractor would not start. We tried everything, including a jump start off his truck. Couldn't even get the lights, hazards, anything electrical, to come on. No crank at all after. This was more than a dead battery issue. Checked all of the electrical connections. Everything was in neutral, no seat belt interlock, kill switch was in the proper position. Nothing. Very disappointing. This is my 4th visit to the dealership to buy a tractor, and we have yet to make a purchase. GM called his regular salesman, who was still in Vegas for the New Holland show to find out how to start the darn thing. No luck there. After messing with it for nearly an hour, we never did get it running. And I did get to play in the dirt and get greasy, just not the way we intended. But we know it started at some point, because they drove it off the truck when it was delivered to the lot. Weird. Bad Omen?
ANYWAY, here are my observations:
Tractor quality is OK. I use that in the relative sense, as in "just ok" compaired to the 2615. The deck did not feel as rigid as the 2615 in a few spots toward the front, almost spongy. It does have a rubber mat covering, as opposed to the 2615, which does not. But that was not the difference. It was almost as if it was loose under the matting. But it was one solid piece, so that's not it. Just thinner material or not welded as securely?
FEL is not quick attach. No bucket level indicator. Looks like FEL will be a major pain in rear to remove and store. Engine access is much easier than 2615, with lift up hood, as opposed to hood and dropped sides on 2615. Brush guard on front is easy to drop for engine access. Tool box and cup holder are a bit of a joke, IMO, located on the fenders behind the seat. Tool box is not as big of an issue, since you won't be using tools and driving at the same time. It is small. Not much you can put in there. Cup holder-you have to twist around to reach it. Why bother? Better off getting one of those hardhats with the tubing that comes down to your mouth. At least that will hold two drinks.
Seat on the 2525 is spring loaded, which I imagine would take up alot of bounce from uneven ground and vibration. Seat has armrests, too. Dash is easy to read, and has guages and warning lights for everything, including PTO. Control layout seemed a bit awkward compared to the 2615. Throttle down low, and Shuttle Shifters for Forward/Reverse on the left side of the console, and gear selection on the right side of console. Not having gotten to actually drive it, not sure how this might play out in actual usage. PTO and FWD/RWD on the side, which seems normal to me.
Bucket is operated with joystick control, and has automatic float.
Package deal for tractor with FEL, 5' American cutter and 5' box blade is about $13,000(?)
Interesting note. While we were there, another couple came in specifically to see the 2525. This guy had been looking at gray market tractors in the area, and heard about the 2525. He dropped the gray market idea in favor of used when he saw the price on the 2525, terms, and warranty. Mahindra is going to sell alot of these units. Price point is good, and for the weekend warriors like myself and this guy, who are not going to be power users, they do make sense.
Still not buying until I drive it. They have set up a pile of dirt on the yard for buyers to compare not just feel, but actual bucket operation, etc..... I am hoping they can get this thing started today or tomorrow, then I'll go back over and play in the dirt for awhile and HOPEFULLY make a purchase. These guys must love their Mahindras-They sure are making me work to buy one.
Not trying to bag on the dealer. They have been very pleasant to deal with, and have not been doing the pushy hard sell, that I hate.
Thank you for the information. I personally got tired of waiting for them to come in and now am working a deal on the 3525. I would have liked 4wd but I really like the 3525 and it looks to be a substantial upgrade from my 9n.
I too think they will sell a bunch of the 2525 model if they get their act together.
I too think they will sell a bunch of the 2525 model if they get their act together.
LAWALLSTRACTOR
Veteran Member
The non Q/tach loader was done to keep the price down, and that decission was made because most q/tach loaders that are sold, are never removed from the tractor.
sseelhoff
Veteran Member
LAWALLSTRACTOR said:
Is the non-running engine a means to meet rising emission standards?
xlr82v2
Platinum Member
- Joined
- Dec 3, 2004
- Messages
- 703
- Location
- Southwestern Illinois
- Tractor
- 2007 Mahindra 3525, 1952 Ford 8N
sseelhoff said:Is the non-running engine a means to meet rising emission standards?
That's one way to skin that cat!
EFC
Veteran Member
SSEELHOFF; Sounds like the dealer should spend less timed in Vegas and more time putting a professional product on the lot. This is not a problem with a particular model line this is a dealer problem. Even the 2615 without proper dealer setup wont start. We have had zero electrical issues with the 2525. In fact I was very happy to see the quality of the electrical components that were used.
Buck
Buck
EFC
Veteran Member
grfok said:
It is a lot like comparing a Toyota car with a Dodge van. Different tractor for different uses.
Buck
Here are some similar links:
