grnspot110
Elite Member
- Joined
- May 16, 2007
- Messages
- 2,734
- Location
- MO
- Tractor
- John Deere 1944- H, 1961 Cub Lo-Boy, 2016- JD 2025R, 2018- JD X580
Finished my grille guard for the 790 yesterday! My steel supplier sold me a couple of scrap pieces of flattened mesh for $5, one piece was big enough for the grille guard. 
After cutting to size, I bent the sides back, welded on an 1/8" x 3/4" angle on the top, 1/2" angle on the back edges, & an 1/8" x 3/4" strap along the bottom as a stiffener. The bottom fits into a channel on the chain box, a long 3/8" pin through the top pipe on the factory guard holds the top in place, easy off.
Next project is a 2' x 4' receiver hitch cargo rack for the 3-pt adapter! ~~ grnspot110
After cutting to size, I bent the sides back, welded on an 1/8" x 3/4" angle on the top, 1/2" angle on the back edges, & an 1/8" x 3/4" strap along the bottom as a stiffener. The bottom fits into a channel on the chain box, a long 3/8" pin through the top pipe on the factory guard holds the top in place, easy off.Next project is a 2' x 4' receiver hitch cargo rack for the 3-pt adapter! ~~ grnspot110
