Alternative to Lock-N-Lube.

[WranglerX]

Alternative to Lock-N-Lube?

22 ORIGINAL : Ez-Pz Lube 1kPSI Lock Grease Coupler-Grease Coupler Adapter - - Amazon.com

Dale

 

[fried1765]

Alternative to Lock-N-Lube?

22 ORIGINAL : Ez-Pz Lube 1kPSI Lock Grease Coupler-Grease Coupler Adapter - - Amazon.com

Dale

Judging from the picture, I would not find it nearly as convenient to use as my Lock-N-Lube.
10 bucks cheaper, but not as good!

 

[ruffdog]

First pic looks like a LNL while the others are different. Which is it? The jaws look like formed sheet metal.?

 

[Citydude]

I ran across one in our local farm supply store. I don’t have a lock and lube so can’t compare.

It works fine.

 

[Bearsixty7]

Alternative to Lock-N-Lube?

22 ORIGINAL : Ez-Pz Lube 1kPSI Lock Grease Coupler-Grease Coupler Adapter - - Amazon.com

Dale

If it has a smaller diameter barrel than the L-N-L, I 'd be interested. The L-N-L won't fit into the pins on many of the CUT and SCUT backhoes.

 

[weldingisfun]

I ordered one. It won't get here until the first week of December. What's that all about?

 

[fried1765]

I ordered one. It won't get here until the first week of December. What's that all about?

"first week of December"??
Direct ship from China?

 

[sixdogs]

I've had them all and nothing beats the Lock-N-Lube. It kills me to pay retail but it's the only one I have found that works. On my deep recessed fittings on my Woods mower deck, I use the Lock-N-Lube extra long version and that saves me a lot of grief when greasing things. Just my two cents.

 

[fried1765]

I've had them all and nothing beats the Lock-N-Lube. It kills me to pay retail but it's the only one I have found that works. On my deep recessed fittings on my Woods mower deck, I use the Lock-N-Lube extra long version and that saves me a lot of grief when greasing things. Just my two cents.

So..oooo correct !!

 

[jonsstihl]

there is an alternative that 4shorts has advertised on his channel. it is similar in function to a quick connect chuck on an air hose but once you pressurize it you cannot get it to release. example if a zerk doesn't take the grease.

they also make a valve that you can add that releases the pressure when it does happen. it is by univerco out of quebec. lifetime warranty. not made in USA but atleast it is designed in north america. not sure exactly where it is actually made.