Artisan
Veteran Member
Thats a kick just watching it! :thumbsup::thumbsup:
All Downhill From Here
- Thread starter Short Game
- Start date
- Views: 2438
brin
Super Member
Just imagine if your foot slipped off the foot rest or one of your arms went off to the side at the wrong time.....it has to be a tense ride since you have to be sure to stay tucked in...
TCJatko
Platinum Member
This reminds me of the way cog railway employees used to get down from the top of Mt. Washington here in NH:
"Devil's shingle:Since the early days of the railway's construction the workers wanted to minimize time when climbing and descending the ramp, so they invented slideboards fitting over the cog rack and providing enough room for themselves and their tools. These boards no two were exactly alike were approximately 90 cm (35 in) long by 25 cm (9.8 in) wide, made of wood with hand-forged iron and with two long hardwood handles usually attached at the down-mountain end. Common times for the descent of the mountain using these boards were about 15 minutes. The record was 2:45, an average speed above 100 km/h (62 mph).[1]
The "Devil's shingles" were banned in 1906 after the accidental death of an employee."
"Devil's shingle:Since the early days of the railway's construction the workers wanted to minimize time when climbing and descending the ramp, so they invented slideboards fitting over the cog rack and providing enough room for themselves and their tools. These boards no two were exactly alike were approximately 90 cm (35 in) long by 25 cm (9.8 in) wide, made of wood with hand-forged iron and with two long hardwood handles usually attached at the down-mountain end. Common times for the descent of the mountain using these boards were about 15 minutes. The record was 2:45, an average speed above 100 km/h (62 mph).[1]
The "Devil's shingles" were banned in 1906 after the accidental death of an employee."
jimmyj
Elite Member
- Joined
- Aug 28, 2007
- Messages
- 4,126
- Location
- Ontario Canada
- Tractor
- Allis Chalmers 616 (Two) and a Kioti CK30 HST with loader and backhoe
Wow. I'd love to do that.
OP
Short Game
Veteran Member
Anyone ever watched Jean Yves Blondeau, A.K.A., Buggy Rollin?
[ame=http://www.youtube.com/watch?v=sx0s-92tXqo&feature=related]SWISSPASS 2 BUGGY ROLLIN by jean yves Blondeau - YouTube[/ame]
[ame]http://www.youtube.com/watch?v=1MKcM0_uW8Y&feature=related[/ame]
[ame=http://www.youtube.com/watch?v=sx0s-92tXqo&feature=related]SWISSPASS 2 BUGGY ROLLIN by jean yves Blondeau - YouTube[/ame]
[ame]http://www.youtube.com/watch?v=1MKcM0_uW8Y&feature=related[/ame]
MossflowerWoods
Super Member
- Joined
- Aug 12, 2011
- Messages
- 6,025
- Location
- Fredericksburg, VA
- Tractor
- Kioti DK50SE HST w/FEL, Gravely 60" ZTR Mower. Stihl MS290 (selling), CS261, & FS190 + Echo CS400 & 2010 F-350 6.4 PSD snowplow truck
jimmyj
Elite Member
- Joined
- Aug 28, 2007
- Messages
- 4,126
- Location
- Ontario Canada
- Tractor
- Allis Chalmers 616 (Two) and a Kioti CK30 HST with loader and backhoe
X2!!!!
AGGIE00
Gold Member
- Joined
- May 9, 2010
- Messages
- 465
It's all fun and games until a tree falls on the rail.
Dutch445
Elite Member
rollerboy is wild,
love the music too
imagine hitting one of those roadside pylons/barriers at
that speed???
amazing hobby
:thumbsup:
love the music too
imagine hitting one of those roadside pylons/barriers at
that speed???
amazing hobby
:thumbsup:
