All Downhill From Here
- Thread starter Short Game
- Start date
- Views: 2537
creekbend
Super Star Member
It's a safe bet that no Amusement Park in The United States offers a ride that can match the thrill of that ride.
OP
Short Game
Veteran Member
Viewing it in full screen is about as brave as I will get (but I did it twice).
I thought about posting it in "Build-It Yourself."
I thought about posting it in "Build-It Yourself."
Scooby074
Super Member
That's awesome.
Id love to get a ride on that. Looks like a blast. Long ride too.
Id love to get a ride on that. Looks like a blast. Long ride too.
Artisan
Veteran Member
WooHOO!!!
(changes shorts)
Awsomeness! I would like to see the cart.
(changes shorts)
Awsomeness! I would like to see the cart.
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 29,519
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
It's a lot of fun... most cost about $5 a ride... you can get a better deal with a 10 or 20 ride pass.
The lever between the knees is a rudimentary brake... pulling back presses a small plastic block against the rail... it won't stop on a dime... it will slow you a little... and give you something to hold on to!!!
The lever between the knees is a rudimentary brake... pulling back presses a small plastic block against the rail... it won't stop on a dime... it will slow you a little... and give you something to hold on to!!!
OP
Short Game
Veteran Member
I watched another video of it where a guy is videoing from one coaster as his kid goes down ahead of him. Toward the bottom of the run, he turns the camera left to look at some horses grazing very near the rail.
[ame]http://www.youtube.com/watch?v=Kjw5GhyZUu0&feature=related[/ame]
See the horses at about the 5 minute mark. There's a black cow and more horses at 5:12. I'd rather take a squirrel.
[ame]http://www.youtube.com/watch?v=Kjw5GhyZUu0&feature=related[/ame]
See the horses at about the 5 minute mark. There's a black cow and more horses at 5:12. I'd rather take a squirrel.
MossflowerWoods
Super Member
- Joined
- Aug 12, 2011
- Messages
- 6,024
- Location
- Fredericksburg, VA
- Tractor
- Kioti DK50SE HST w/FEL, Gravely 60" ZTR Mower. Stihl MS290 (selling), CS261, & FS190 + Echo CS400 & 2010 F-350 6.4 PSD snowplow truck
I can't get the original video to play worth a hoot on my @#$%^ing HughesNet...
Looks pretty flipping awesome!
Too bad I need to go to Europe to ride it...
David
Looks pretty flipping awesome!
Too bad I need to go to Europe to ride it...
David
Artisan
Veteran Member
Thats a kick just watching it! :thumbsup::thumbsup:
brin
Super Member
Just imagine if your foot slipped off the foot rest or one of your arms went off to the side at the wrong time.....it has to be a tense ride since you have to be sure to stay tucked in...
TCJatko
Platinum Member
This reminds me of the way cog railway employees used to get down from the top of Mt. Washington here in NH:
"Devil's shingle:Since the early days of the railway's construction the workers wanted to minimize time when climbing and descending the ramp, so they invented slideboards fitting over the cog rack and providing enough room for themselves and their tools. These boards no two were exactly alike were approximately 90 cm (35 in) long by 25 cm (9.8 in) wide, made of wood with hand-forged iron and with two long hardwood handles usually attached at the down-mountain end. Common times for the descent of the mountain using these boards were about 15 minutes. The record was 2:45, an average speed above 100 km/h (62 mph).[1]
The "Devil's shingles" were banned in 1906 after the accidental death of an employee."
"Devil's shingle:Since the early days of the railway's construction the workers wanted to minimize time when climbing and descending the ramp, so they invented slideboards fitting over the cog rack and providing enough room for themselves and their tools. These boards no two were exactly alike were approximately 90 cm (35 in) long by 25 cm (9.8 in) wide, made of wood with hand-forged iron and with two long hardwood handles usually attached at the down-mountain end. Common times for the descent of the mountain using these boards were about 15 minutes. The record was 2:45, an average speed above 100 km/h (62 mph).[1]
The "Devil's shingles" were banned in 1906 after the accidental death of an employee."
jimmyj
Elite Member
- Joined
- Aug 28, 2007
- Messages
- 4,126
- Location
- Ontario Canada
- Tractor
- Allis Chalmers 616 (Two) and a Kioti CK30 HST with loader and backhoe
Wow. I'd love to do that.
OP
Short Game
Veteran Member
Anyone ever watched Jean Yves Blondeau, A.K.A., Buggy Rollin?
[ame=http://www.youtube.com/watch?v=sx0s-92tXqo&feature=related]SWISSPASS 2 BUGGY ROLLIN by jean yves Blondeau - YouTube[/ame]
[ame]http://www.youtube.com/watch?v=1MKcM0_uW8Y&feature=related[/ame]
[ame=http://www.youtube.com/watch?v=sx0s-92tXqo&feature=related]SWISSPASS 2 BUGGY ROLLIN by jean yves Blondeau - YouTube[/ame]
[ame]http://www.youtube.com/watch?v=1MKcM0_uW8Y&feature=related[/ame]
MossflowerWoods
Super Member
- Joined
- Aug 12, 2011
- Messages
- 6,024
- Location
- Fredericksburg, VA
- Tractor
- Kioti DK50SE HST w/FEL, Gravely 60" ZTR Mower. Stihl MS290 (selling), CS261, & FS190 + Echo CS400 & 2010 F-350 6.4 PSD snowplow truck
jimmyj
Elite Member
- Joined
- Aug 28, 2007
- Messages
- 4,126
- Location
- Ontario Canada
- Tractor
- Allis Chalmers 616 (Two) and a Kioti CK30 HST with loader and backhoe
X2!!!!
AGGIE00
Gold Member
- Joined
- May 9, 2010
- Messages
- 465
It's all fun and games until a tree falls on the rail.
Dutch445
Elite Member
rollerboy is wild,
love the music too
imagine hitting one of those roadside pylons/barriers at
that speed???
amazing hobby
:thumbsup:
love the music too
imagine hitting one of those roadside pylons/barriers at
that speed???
amazing hobby
:thumbsup:
