AGRITEC Rotary Tiller AT20

   / AGRITEC Rotary Tiller AT20 #1  

plato56

New member
Joined
Apr 10, 2011
Messages
2
Location
Asheville, NC
Tractor
TYM T293 HST
Hello Everyone,
I have the above tiller attachment. I'm trying to identify the chain lube level check location. The manual doesn't cover this very will. I'd like to know if the oil plug located near the bottom of the "chain cover" is how I check the oil level. Do I fill the case with oil until it starts draining out of the plug hole?
 
   / AGRITEC Rotary Tiller AT20 #2  
Welcome to TBN. :)
 
   / AGRITEC Rotary Tiller AT20
  • Thread Starter
#4  
Hello Everyone,
I have the above tiller attachment. I'm trying to identify the chain lube level check location. The manual doesn't cover this very will. The only holes in the chain cover are the fill hole in the top, the chain tentioner adjustment about half way up on one side and the drain hole near the bottom. Did they forget to put in a level inspection hole? I tried to check the level by putting a coat hanger into the top of the case but the internal gearing stops the wire about 2" down. Also, where can you find parts for these if needed?QUOTE]
 
   / AGRITEC Rotary Tiller AT20 #5  
Hi! For your At-20 tiller. At top is the oil filler bolts or hole. at bottom is the oli level plug. You can run the tiller. Stop the tiller remove bottom plug add oil until oil escape. you screw the plug. Very few oil SAE 90 EP inside. Good luck ! Oldmech
 

Tractor & Equipment Auctions

2017 Ford Escape AWD SUV (A55758)
2017 Ford Escape...
UNUSED 200 AMP 13' JUMPER CABLES (A54756)
UNUSED 200 AMP 13'...
2008 FORD RANGER SINGLE CAB TRUCK (A51406)
2008 FORD RANGER...
2017 KOMATSU D39PX-24 CRAWLER DOZER (A52705)
2017 KOMATSU...
Generac Yanmar 5000Watt Heavy Duty Diesel Generator (A51691)
Generac Yanmar...
33ft Dovetail Flatbed Trailer (A55301)
33ft Dovetail...
 
Top