adding top and tilt

[MtnViewRanch]

If this is all correct could you commend a set up for me? and is there any reason to have more that a top/tilt on the back end.

Thanks for taking the time and all the help!

If all you will ever do is use a top & tilt set, then 2 is all that you will ever need. A lot of people like to have hydraulic actuated implements which can easily add up to 4 more sets for a total of 6 sets of rear remote outlets.

So it all depends on you. I would add 3 sets at a minimum and really think about what you want to do in the future. On the safe side, be sure to use stacking valves so that more controls and outlets are easier to add in the future. Be sure to get at least one of the remotes with the float function and 2 is better in my opinion.

 

[runningbird]

It is not using the PB, I did follow instructions exactly, and on the valve instructions.

http://www.koykermfg.com/images/koyker-manuals/665376 (155).pdf

I put this loader on about 8 years ago and it has worked well. I also could redo the set up if that is what you think would be best.

I do also thank you for your help!

Heading out of town soon, so not sure I'll have time to check back

hope everyone has a great Thanksgiving!

 

[runningbird]

Yes, I want two with a float.

 

[J_J]

The instructions are there for the PB installation.

The valve came as open center valve with plug in the PB port.

It is up to you if you want to change things as it has been working for you.

Logically, you would add valves is series with the PB port from previous valve feeding the IN port of the next valve.

A two spool monoblock valve with PB will be the least expensive with out float.

You need stacked valves to add float.

 

[runningbird]

I will want float. and maybe I should look at more valves.

thank you

 

[J_J]

This valve has float on one spool and PB.

2 SPOOL 8 GPM PRINCE MB21GB5C1 DA VALVE W/FLOAT

 

[Xfaxman]

---------------- and is there any reason to have more that a top/tilt on the back end.
-----------------------

-------------------------

Heading out of town soon, so not sure I'll have time to check back

hope everyone has a great Thanksgiving!

Have a good trip and a Happy Thanksgiving. :thumbsup:

Here is one reason for three remotes, .

And 4 remotes.