dont_mess_wit_SUPER_M
New member
I was wondering what all can I do to add the horses to my super m.
Adding hps?
- Thread starter dont_mess_wit_SUPER_M
- Start date
- Views: 1340
TedLaRue
Gold Member
Over the years I've observed that when someone attempts to add new horses to their machine, the original horses feel slighted and start acting up, resulting in a decrease in overall performance.
Teams of engineers who know a lot more than you and I have already squeezed all the power they can from the engine in your machine.
Direct your energy into proper maintenance of the machine you have, or direct it into earning enough to buy a more powerful machine.
Teams of engineers who know a lot more than you and I have already squeezed all the power they can from the engine in your machine.
Direct your energy into proper maintenance of the machine you have, or direct it into earning enough to buy a more powerful machine.
BobG_in_VA
Veteran Member
- Joined
- Jul 4, 2003
- Messages
- 2,027
- Location
- Central VA, USA
- Tractor
- Mahindra 6000 MWFD, 2 1950's Farmalls, 1974 Farmall 140, 1967 Mf 135Delux
Unless, your M is "weak" to start with, you don't need to increase the HP beyond what IH built into it....if it will spin the tires in first/second gear without choking out the engine, what will more HP do for you except drink more gas?....if you absolutely have $$$ buring holes in your pants pockets, get a set of FireCrater pistons and oversize venturi for the carb...you'll spend a bunch to get about another 15HP....BobG in VA
Matt_Jr
Platinum Member
Goin' to a tractor pull?
OP
dont_mess_wit_SUPER_M
New member
yep!!
bx23barry
Platinum Member
- Joined
- Jun 17, 2006
- Messages
- 500
- Tractor
- Kubota BX23
A chevy small block should be a good swap. Cut hops at 40mph.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
How many places you gonna post this?
soundguy
soundguy
AndyinIowa
Silver Member
As an engineer, I disagree with the 'we've squeezed out all we can' statement...
We intentionally make everything capable of three times the power that the customer gets for a stock machine. That way, when they show up on a forum like this, we are the heroes for telling them how to turn up the power!!
On a Super M, there is a little screw on the left side. In for more power, out for less... You can put in a longer screw if you need.
Seriously, talk to your local machine shop. As with most powersports, power = $$$. You can do a lot with the right money and skills...Your engine is an air pump. Keep that in mind!
IowaAndy
We intentionally make everything capable of three times the power that the customer gets for a stock machine. That way, when they show up on a forum like this, we are the heroes for telling them how to turn up the power!!
On a Super M, there is a little screw on the left side. In for more power, out for less... You can put in a longer screw if you need.
Seriously, talk to your local machine shop. As with most powersports, power = $$$. You can do a lot with the right money and skills...Your engine is an air pump. Keep that in mind!
IowaAndy
