Backhoe Adding a backhoe and loader

js5020 · Sep 5, 2003

I am thinking about adding a hoe and loader on my AC 5020 and would like some input from owners of similar make machines as whether the machine is heavy enough to take this combo, does the clutch housing hold up, it seems to be made of aluminum, or is it prone to fail. is the front axle prone to gear or housing breakage? Anyone added power steering to a similar model ? I'm thinking without power steering it's going to be difficult to steer with a full bucket.

buppy69 · Sep 6, 2003

I've heard of these tractors breaking in half with a front loader attached to the transmission. You would most certainly have to use a full subrame which is what Hinomoto does at the factory. I have installed Yanmar power steering on a Hinomoto and it worked out pretty well. However if I had to do it again I would go to the MF or Allis dealer and order the correct parts for the tractor. Either way it cost about $1200.
The front axle is plenty sturdy.
Eugene

lens12 · Sep 13, 2003

I'd recommend a sub frame also. I get the most parts calls on Hinomotos about FWD gears breaking. I would be very careful when using the loader.

js5020 · Sep 19, 2003

Thanks for your input guys, I had heard about only putting a subframed loader on this machine and I did take a look at the original sales flyer and sure enough the AC loader has a full subframe. Would the problem with the front gears be a counterweighting issue or just a weak design and to much traction from the front axle?