8 to 6 wheels

[woodlandfarms]

When we get back home in the next two weeks I need to do some edge scraping (angle my box blade and make some water runoff ditches). My box blade is only 7ft and my tires width is 7.7feet.

So, can I take one set of tires off one side of the tractor and drive around for a bit without fear of bunging things up? I ask / do this as I am fat and lazy and do not want to take the other side off.

It would be a short term, yet repeated event.

Carl

 

[Robert_in_NY]

Does your box blade off set any or will the other tires still be sticking out a few inches if your box blade is centered?

 

[ponytug]

It won't hurt the wheel motors, just be sure not to overload the tires- I don't know what the ratings are on your dualie tires. Charlie runs singles most (all?) of the time.


All the best,

Peter

When we get back home in the next two weeks I need to do some edge scraping (angle my box blade and make some water runoff ditches). My box blade is only 7ft and my tires width is 7.7feet.

So, can I take one set of tires off one side of the tractor and drive around for a bit without fear of bunging things up? I ask / do this as I am fat and lazy and do not want to take the other side off.

It would be a short term, yet repeated event.

Carl