Chipper 8" Jimna chipper

[Ductape]

If its an eight, I wouldn't complain since (from what I've read) they are all basically the same. Just don't bother trying to feed it eight inch wood. Its good to have a bigger feed opening, since the crotches on the limbs will fit right through.

 

[MickeyNew]

After several emails back and forth to the dealer, they still insist that it really is a 6" machine with the wrong ID plate. There were two different guys replying to me. One said the 8" machine has 4 10" blades. Mine has only two. I cannot verify or disprove that. The horizontal opening is 8" and the feed roller opens to 8" which one of the guys said would make it an 8" machine. I used it again today. Who knows?

 

[Affordable]

There are alot of Jinma clone pics,the original Jinma chipper is only 6" and does not look like that pic,they are similier in design.We sell the 6" model original Jinma like the attached pic,and now also sell a 8" chipper branded by us as a TomCat,it has some options that I never could get the Jinma factory to do such as.You have to be carefull when you order parts because all Jinma parts will not fit the others

Adjustable Ski type legs, 360 degree discharge chute,upgraded feed driveshaft,8" capacity.

The yellow one is a Tomcat and the Green one is a Jinma


Tommy
Affordable Tractor Sales Co.
"Your Jinma parts Superstore "
Home of compact Jinma, Foton, and Koyker Tractors and Parts, Wood Chippers, Backhoes - Affordable Tractor Sales Company