59" snowblower 2520 compact

[biyou]

John Deere only shows a 47" front snowblower to fit a 2520 compact the trouble with that is it doesn't cover the tires I have a 59" I bought off eBay
and I want to put it on my tractor. Any ideas ?
Thanks biyou

 

[kennyd]

Welcome to TBN

To my knowledge, this has never been done by anybody here on TBN-discussed a few times but never done...

You will have to fabricate the front hitch, as well as the front PTO hanger to get it to work...Being able to see in person both setups would probably help immensely, as well as proficiency in navigating through jdparts.com also.

 

[tkoza]

biyou

take a look at the front quick-tatch "m01471x" on the jd parts site. there is a chance it could work

the box around the gearing on the thrower should have a 1" dia stud sticking out either side on the upper back corner and a 3/4" hole below to receive pins

you will also need the front pto kit which extends the mid pto up front via a driveshaft and pivot going upfront

lookup jd part number AM124588 it is the frame that is part of a "quick-tatch"

the part # are for ideas only

tkoza

 

[biyou]

Welcome to TBN

To my knowledge, this has never been done by anybody here on TBN-discussed a few times but never done...

You will have to fabricate the front hitch, as well as the front PTO hanger to get it to work...Being able to see in person both setups would probably help immensely, as well as proficiency in navigating through jdparts.com also.

Thanks biyou

 

[biyou]

biyou

take a look at the front quick-tatch "m01471x" on the jd parts site. there is a chance it could work

the box around the gearing on the thrower should have a 1" dia stud sticking out either side on the upper back corner and a 3/4" hole below to receive pins

you will also need the front pto kit which extends the mid pto up front via a driveshaft and pivot going upfront

lookup jd part number AM124588 it is the frame that is part of a "quick-tatch"

the part # are for ideas only

tkoza

Thanks for the reply Biyou