5600 Toolcat back wheels stuck side ways and wont turn back

   / 5600 Toolcat back wheels stuck side ways and wont turn back #11  
The main hydraulic pump supplies fluid to the steering system...is your hydraulics functioning? Fluid from the pump goes to the steering control unit at the bottom of the steering column. It has what looks like a little gear pump and valving inside that controls how far you steer L/R. There is a diagnostic port at this item.

From there the fluid goes to the steering selector valve that is rear of the engine. It has 3 solenoids (A, B, and C) that control if it is in front steer or 4ws. Solenoid C is the center one and is open during front steer while A & B are closed. In 4ws, C is closed and A, B are open. I would assume that the 4ws switch in the cab controls this valve.

From there the fluid is directed to the front and rear steering cylinders.

If your hydraulics don't work either...check fluid, pump, etc. If they work normally, check pressure at steering control unit's diagnostic port.(?)

If pressure is fine, are the solenoids on the steering selector valve working? Is the cab switch working?

Did the seals in a steering cylinder suddenly go bad? One bad cylinder may affect both being that they are plumbed together.
 
   / 5600 Toolcat back wheels stuck side ways and wont turn back #12  

Tractor & Equipment Auctions

2004 DRAGON 150 BBL ALUMINUM VACUUM TRAILER (A53843)
2004 DRAGON 150...
Sky Trak 10054 Legacy 10K Telehandler (A54865)
Sky Trak 10054...
2012 Peterbilt 382 T/A Day Cab Truck Tractor (A55788)
2012 Peterbilt 382...
Test Button (A47477)
Test Button (A47477)
UNUSED WOLVERINE PT-16-01C 3P QUICK ATTACH (A54757)
UNUSED WOLVERINE...
2014 Peterbilt 384 T/A Wet Kit Day Cab Truck Tractor (A54814)
2014 Peterbilt 384...
 
Top