Snow 54 quick hitch blade

   / 54 quick hitch blade
  • Thread Starter
#41  
Thanks bigtiller! It took some time, not perfect at all, seeing as it has a couple extra holes. Ha! But like beenthere mentioned, as long as it works! Well ovrszd, the most I can squeeze out is about 70*...that’ll have to do! I should’ve thought about that when I lined up that bottom pivot hole...�� Next time. Ha! I didn’t add those lock holes, but I could always do that later. Real test will be plowing snow, if we get some, or some dirt come spring/summer time when we landscape our yard.
 
   / 54 quick hitch blade
  • Thread Starter
#43  
Yea? I’m hoping. That’s a guess too.. Could be less. Was a poor mans set up to check the angle. I’ll grab my daughters protractor and give it a go. Ha! I’m not to worried about hitting curbs, rocks, etc. I have a paved drive, albeit 600’, but im not using it for parking lots and commercial properties. Should be fine.
 
   / 54 quick hitch blade #44  
Thanks bigtiller! It took some time, not perfect at all, seeing as it has a couple extra holes. Ha! But like beenthere mentioned, as long as it works! Well ovrszd, the most I can squeeze out is about 70*...that’ll have to do! I should’ve thought about that when I lined up that bottom pivot hole...�� Next time. Ha! I didn’t add those lock holes, but I could always do that later. Real test will be plowing snow, if we get some, or some dirt come spring/summer time when we landscape our yard.

You cannot push any dirt without locks. You might be able to push significant snow without locks. I got tired of it tripping all the time and locked mine. Good luck.
 
   / 54 quick hitch blade
  • Thread Starter
#45  
Ahh. Good point ovrszd! I will need to add some holes this spring then! Thanks!
 

Tractor & Equipment Auctions

1977 CATERPILLAR D6D (A52472)
1977 CATERPILLAR...
2020 John Deere 8R 410 MFWD Tractor (A53342)
2020 John Deere 8R...
2009 Hino 268 Progress VTA72 1500 Gallon Vacuum Truck (A51692)
2009 Hino 268...
TORO MBTX 2500 STAND-ON CONCRETE BUGGY (A51406)
TORO MBTX 2500...
2008 CATERPILLAR 226B2 SKID STEER (A51246)
2008 CATERPILLAR...
MILLER SYNCROWAVE 351 TIG WELDER (A52472)
MILLER SYNCROWAVE...
 
Top