50 Hours Maintenance Question

[sailorman3]

I can’t find that zerk on my ck3510 either. But even if you have a HSTmodel, you do have a clutch peddle and a zerk underneath the floorboard for it.

 

[Stan B]

I can’t find that zerk on my ck3510 either. But even if you have a HSTmodel, you do have a clutch peddle and a zerk underneath the floorboard for it.

Mine doesn't seem to have a clutch.

Hey Stan, please do the video. Thanks.....

Here you go. Hope this helps!

 

[sailorman3]

When you put your tractor in low, medium or high or when you start your pto, there is a foot peddle on the left side. You also need to depress it to start. That is a clutch peddle. On the bottom of the floor panel where it has a lever it has a grease zerk.

 

[sailorman3]

Also I looked at that video but do not have the grease zerk it shows.

 

[Stan B]

When you put your tractor in low, medium or high or when you start your pto, there is a foot peddle on the left side. You also need to depress it to start. That is a clutch peddle. On the bottom of the floor panel where it has a lever it has a grease zerk.

Yup, no left pedal on mine. I think I read they removed the clutch on SE models when they switched to electronic PTO engagement.

 

[mcmopar]

Mine doesn't seem to have a clutch.


Here you go. Hope this helps!

Thanks for the video Stan, that did the trick!