4630 Deluxe Remotes Question

   / 4630 Deluxe Remotes Question #1  

rking453

New member
Joined
Nov 29, 2024
Messages
3
Tractor
John Deere 3032E
I have a 1996 New Holland 4630 with 3 rear remotes. Currently they all detent into position. I want to remove the detent function so they are momentary only. I saw in the manual you can back off a set nut and adjust this, but it has no effect. I even completely removed the spring and it made no difference. Any ideas on how to remove the detent function? Thank you.
 

Attachments

  • PXL_20250127_141650629.RAW-01.COVER~2.jpg
    PXL_20250127_141650629.RAW-01.COVER~2.jpg
    1.6 MB · Views: 53
   / 4630 Deluxe Remotes Question #2  
If I recall correctly, that is the way you do it. You can look at the parts diagram and see that the plunger (34, 35, 36) is probably stuck. You can take that screw assembly off and take a look.
 

Attachments

  • Deluxe remote.jpg
    Deluxe remote.jpg
    160.1 KB · Views: 50
   / 4630 Deluxe Remotes Question
  • Thread Starter
#3  
Even with parts 34 - 39 removed the handles still detent.
 
   / 4630 Deluxe Remotes Question #4  
Then I would say your detent mechanism may be gummed up, specifically 42-50.
 

Tractor & Equipment Auctions

POWERSMART GAS PUSH MOWER (A50460)
POWERSMART GAS...
(1) 8ft Tarter Gate (A48837)
(1) 8ft Tarter...
2015 International ProStar Truck, VIN # 3HSDJAPR5FN580085 (A48836)
2015 International...
2017 Ford F-450 Crew Cab Mason Dump Truck (A50323)
2017 Ford F-450...
UNUSED KJ 12' X 20' SINGLE GARAGE METAL SHED (A50460)
UNUSED KJ 12' X...
2018 Bobcat E50 Midi Excavator (A49346)
2018 Bobcat E50...
 
Top