Over time my pick up levers on the right, (to pick up 3 pt in back) will barely move. It's a huge pain to bush hog and not be able to easily pick up the Bush hog. Just checking to see if there are actual grease fittings or anything on there? Thanks
Ballast 4530 Pick Up Levers Question
- Thread starter Blaze08
- Start date
- Views: 1374
RNeumann
Elite Member
From what I remember this issue has been solved by cleaning the linkage and your favorite spray lube. I believe their are other posts on the subject. It’s not called the pickup lever though.
Thanks, what is it called then? My mind went blank.
jeff9366
Super Star Member
- Joined
- Jan 14, 2011
- Messages
- 12,787
- Tractor
- Kubota Tractor Loader L3560 HST+ ~~~~~~~~~~~~~ 3,700 pounds bare tractor, 5,400 pounds operating weight, 37 horsepower
LOWER LINKS
Reb954
Platinum Member
He Referring to the lever that operates the 3 point so 3 point lever would be the proper terminology.
I don稚 know about his model but mine has grease zerks on the lever pivot points.
I don稚 know about his model but mine has grease zerks on the lever pivot points.
RNeumann
Elite Member
Sorry if I came across wrong. Just wanted you to have some luck if you were to do a word search. Looks like you got good answers to the name. 3 point lever would work. Draft control may work but some will have a narrower definition of draft control so that can be hit and miss. Good luck and let us know if you need anything else.
Last edited:
