USMC2531
Bronze Member
Hello,
I have a 2009 John Deere 4120 with a 400CX loader with a 4/1 bucket on it. Until know the loader has performed flawlessly.
Currently I have no downward pressure when I push the loader on the ground. I won't even pick the front wheels off the ground. Also the loader will only lift about half way up to.
The 4/1 bucket opens & closes fine. The bucket will curl up and down fine and can even lift a bucket of dirt,but as I said it will only lift half way up and no downward pressure.
ANY HELP identifying this problem would be GREATLY appreciated.
*Ignore me guys I figured it out ! One of the hydraulic connections had come disconnected slightly. I guess I should have pulled on them first rather than just look at them and assume they were connected.
best,
Steve
I have a 2009 John Deere 4120 with a 400CX loader with a 4/1 bucket on it. Until know the loader has performed flawlessly.
Currently I have no downward pressure when I push the loader on the ground. I won't even pick the front wheels off the ground. Also the loader will only lift about half way up to.
The 4/1 bucket opens & closes fine. The bucket will curl up and down fine and can even lift a bucket of dirt,but as I said it will only lift half way up and no downward pressure.
ANY HELP identifying this problem would be GREATLY appreciated.
*Ignore me guys I figured it out ! One of the hydraulic connections had come disconnected slightly. I guess I should have pulled on them first rather than just look at them and assume they were connected.
best,
Steve
Last edited:
