3pt Mounted Snow puller?

[Winmac]

They are basically a snow pusher with the three point adapter welded to the front,
Recently there was a thread "inverted plows" discussing them.

 

[Baby Grand]

How about something like this (see photos at bottom of page):

http://www.tractorbynet.com/forums/attachments/146715-rear-blade-side-plates.html

They are optional on some blades.
I believe reicher69 also built some side plates for his blade.

 

[Wyobuckaroo]

I use my FEL and a 5' back blade with a homemade wing and skid shoes for snow...
This is on my older JD 855...
Not pretty..... But.... works well for me..
Good luck...
===

===

 

[coldfingers]

I had a six foot bush hog box blade on back and that worked pretty well, now I went up to a seven footer, no snow yet to test it out. I have a place across the road from me that I can carry the snow to and pile it.

 

[skyhook]

I had a six foot bush hog box blade on back and that worked pretty well, now I went up to a seven footer, no snow yet to test it out. I have a place across the road from me that I can carry the snow to and pile it.

Do you have a camera to take a picture of that 7 footer.

 

[coldfingers]

Yes I do, I will have to take some pics, it is the severe extreme duty model from everything attachments which weighs 725 lbs. I had to pay extra to get it shipped to me as I am out of their free shipping zone.

 

[ff1221]

I have one, it's a pin in 3ph with a skid steer quick attach or whatever configuration you need, works great and should be available through most John Deere or Kubota dealers.