3720 display

[gbowling]

I recently purchased a 3720 cab tractor. It's great, but I have a question about the display. The manual says the display toggles between MPH, Hours, loadmatch, motionmatch, and error codes.

However, my display shows MPH, loadmatch, motion match, hours, hours, hours, etc..

There are three hour displays. One is for hours since you started it, sort of a "trip meter" if you will where it just shows how long you've been running it for the current job or task.

The other two hour displays, obviously one of them is the running total of hours and I'm not sure what the other one is.

On my tractor, since it has very little use, one hour meter shows 19.4 hours and one shows 34.1 hours. They both just show a flashing "H" down in the corner.

Anyone know what the displays are?

Thanks

 

[arlen4720]

One hour meter is total engine run hours, one is PTO "on" time, one is machine motion hours. That's all you got. No "trip meter"

 

[gbowling]

One hour meter is total engine run hours, one is PTO "on" time, one is machine motion hours. That's all you got. No "trip meter"

Ah, Thanks very much, less than impressed with the manual so far but the machine is really nice.

The only other thing I'm not very impressed with is how much work is required to switch from the front snowblower to the MMM deck. A pretty hefty job removing the front hitch. At least it's only a twice per year job.