3032E pto problem

[Tx Jim]

The pto on my neighbors 3032E won't engage. My knowledge of these newer tractors is limited. I suggested cheeking fuses,seat switch,pto switch. Does this tractor have a pto speed sensor?
Thanks,Jim

 

[dodge man]

I would check the linkage also.

 

[Tx Jim]

What linkage are you referring to?
Thanks for reply,Jim

 

[dodge man]

I am not sure if a 3032e is like my 2025r but there is a lever that controls mid pto, rear pto or both. If that linkage was messed up it could cause problems, like being stuck in between gears. My tractor has a button to push to start the pto, wiring could be a problem for that. Some tractors have a mechanical linkage to a lever instead to turn the pto off and on, that could be messed up.

 

[Tx Jim]

Thanks for reply. I just got back from delivering my neighbor a rd bale of hay. I checked all 6 fuses that I could locate & they were good. I'll advise them of possible linkage.

 

[Wibb]

If you're looking for something specific let me know. I have the service manual on CD for the 3025/3032/3038.

 

[Tx Jim]

Wibb
Thank you for the offer. Could you tell me which fuse is for pto circuit & where pto relay is located?? I checked all fuses I could locate. I have no experience with this model of tractor. I'm just trying to help this neighbor lady that her husband passed recently.
Thanks,Jim

 

[Wibb]

I'll check it tonight. Shoot me an email if you want in a PM and I'll get you copies of the pages

 

[Tx Jim]

Please check your inbox I sent you a PM.
Thanks,Jim

 

[Wibb]

Lots of info sent. I sent the harness showing the solenoid and PTO switch as well as the schematics and switch pinouts. Hopefully that will point to a wiring issue that can be solved easily. If not I can send over the ICC pins behind the cluster and dig deeper. Let me know how it goes. Good luck