Price Check 3032e Price check

[nirion]

Since he came down another $300 on the price, he didn't want to include the filled tires. I figure I can try it and add it later. I did get him to throw in a rear worklight, materials for the first oil change, 2 hats, and a toy & sweatshirt for my daughter.

After trade ($2000 for my 1972 White 1365), I paid $14500. I was pretty happy.

Thanks again for all the help!

 

[jcdogfish]

From the pricing I got in the last couple of weeks you did make a pretty good deal with all the attachments. The 3032e was one of the best "feeling" tractors I tried out. I couldn't go with it because the loader was not quick detach and I mow in tight spots. Other than that it was my first choice.

 

[nirion]

I'm happy with the price. I got a wide range of quotes. The highest was almost full list and this one ended up the best with delivery and the dealer was great to work with.

According to deere.com, full list is around $20,325 with tractor, loader, R4s, cruise, drawbar, and rear worklight. That puts me at almost 19% off list (including $1000 rebate from deere). Without the rebate, its about 15% off list.

As for the loader, it may not be quite as easy to take off as the 3x20 series, but the bucket comes off pretty easy. Set it down, release two pins, move the arms away and back up.

 

[nikdfish]

JD makes a "parking kit" for the 305 loader. It goes for about $640 (if memory serves) and gives you a quick disconnect option that dismounts everything except the masts.

Nick

 

[JordanFTW]

Congrats on the purchase!

 

[Rackluster]

dang that's a lot less $ than my dealer quoted me for the exact same setup minus the cruise.

so....i showed him what you paid and said match this price and I'll come by tomorrow to sign the papers. he said...ok, when can you be here?

i told him about 4:30.

suppose i should go have that talk w/ the wife. she should probably know i'm doing this.

 

[nirion]

dang that's a lot less $ than my dealer quoted me for the exact same setup minus the cruise.

so....i showed him what you paid and said match this price and I'll come by tomorrow to sign the papers. he said...ok, when can you be here?

i told him about 4:30.

suppose i should go have that talk w/ the wife. she should probably know i'm doing this.

Pick up a Deere shirt for her and say "Look what I bought you honey" Then say "Look what I bought me"

I am still waiting on mine to get delivered, they had to order the cruise and worklight.

 

[Rackluster]

Dealer is playing games now. All of a sudden the price is back to 18k. I'm liking my 950 more and more.

 

[Martian]

Dealer is playing games now. All of a sudden the price is back to 18k. I'm liking my 950 more and more.

How is that? Go elsewhere...

 

[Rackluster]

He wrote it down on paper and used 16.5 as the starting point then started adding everything on top of it, where that price had already included much of it. Basically he double counted some stuff. I didn't realize it right away. If he doesn't match that exact number I'm walking (which is looking more than likely at this point).

 

[FAL]

I have a quote on a used 2010 3032E (105 hrs) with a 305 loader, a new Kodiak 5' rotary cutter, a new Kodiak 5' box scraper and a new 16' equipment trailer with a delivery of 150 miles for $18,300. Is that a decent price?

 

[nirion]

He wrote it down on paper and used 16.5 as the starting point then started adding everything on top of it, where that price had already included much of it. Basically he double counted some stuff. I didn't realize it right away. If he doesn't match that exact number I'm walking (which is looking more than likely at this point).

What state are you in?

 

[nirion]

I have a quote on a used 2010 3032E (105 hrs) with a 305 loader, a new Kodiak 5' rotary cutter, a new Kodiak 5' box scraper and a new 16' equipment trailer with a delivery of 150 miles for $18,300. Is that a decent price?

Trailer is probably about $15-1800, cutter about $1000, box blade $600.
So you are paying about $14900 - 15200 for the tractor and delivery (unless it is a really nice trailer).

I would try to get them down a little.
I paid $16500 for a new 3032e with loader, rear blade, and the other stuff. It would have been a few hundred less without cruise and drawbar. To upgrade to box blade would have been a little bit and then add the trailer and cutter would put me around $19500.

 

[FAL]

Thanks. After reading your deal, I agree that my deal seems a little high.

 

[Rackluster]

Dealer sent over a purchase order at the 16500 price. That's tractor, loader, r4, cruise, draw bar, frontier cultivator. Also I added extra hydraulics and a coolant heater for a total of 17375.

I'm in MN. Hopefully he just did his math wrong initially. Regardless, looks like I will be signing the papers tonight.

 

[nirion]

Dealer sent over a purchase order at the 16500 price. That's tractor, loader, r4, cruise, draw bar, frontier cultivator. Also I added extra hydraulics and a coolant heater for a total of 17375.

I'm in MN. Hopefully he just did his math wrong initially. Regardless, looks like I will be signing the papers tonight.

Glad they came through for you and stuck to their word.

 

[nirion]

Tractor finally got delivered today! 1.8 hours on the meter. There was a delay getting the rear work lights and cruise module or I would have had it 2 weeks ago.

Had to get back to work today, but will get back out and put on some hours this weekend.

 

[vtsnowedin]

:licking: Nice looking machine. Keep us posted on how you like it and how it gets the job done.

 

[nirion]

Thanks! I plan on mowing and maybe moving some dirt this weekend, we'll see.

Here are a couple more pictures. Until I get some stuff moved around and taken out of the barn, it has to go in this way and the rear blade needs turned or removed for ease of access.

 

[Martian]

Congrats! Don't tell me that nice camaro is going to have to get moved! That is a beauty:thumbsup: What year is it? Looks like a late 60's early 70's. I really want a stock '69 Camaro SS in that same color. They were awesome cars!!