300cx Loader, 1 Loader Post Seems Loose

[JasonMac]

I don't really know if this is a big deal or not, but latley I've been noticing one of my Loader Posts seems to wobble, while the other is completly tight. While sitting on the tractor, looking out the front window, my left loader post mount is very tight, my right one seems to wobble quite a bit latley. It isn't the tubes that it mounts to, but it is the loader attchment itself.

Any ideas from anyone?

 

[beenthere]

Check the adjustment tightening bolts, as they may not have been tightened after adjusting, or the adjustment may not have been exactly right. Sometimes paint thickness can cause poor adjustment, which shows later when the paint gets worn away a bit. You should talk to the set-up dealer if its not right.