wildandfree
New member
put fluid in after washer blows now 3 pt hitch up will not lower cannot turn knob for the adjustment and ideas
3 pt hitch stuck
- Thread starter wildandfree
- Start date
- Views: 783
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Which way did you turn the knob?
Counterclockwise will open the valve and adjust the descent rate.
Clockwise will lock the 3pt for transport.
Sometimes parts rust up and jam things.
Remove the screw rod and knob and see if any fluid comes out.
Counterclockwise will open the valve and adjust the descent rate.
Clockwise will lock the 3pt for transport.
Sometimes parts rust up and jam things.
Remove the screw rod and knob and see if any fluid comes out.
OP
wildandfree
New member
i removed the screw no fluid
OP
wildandfree
New member
btw thanks a bunch
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Did you activate the 3pt lever to see if the relief would come on?
There might be other parts in the hole, if not a needle valve.
There might be other parts in the hole, if not a needle valve.
