Chains 3/8 inch tire chains

   / 3/8 inch tire chains #1  

Gizmo2

Veteran Member
Joined
Jul 7, 2006
Messages
1,902
Location
New York
Tractor
JD 2320
Has anyone use these tire chains on a 2320 or 2520? 3/8-inch cross-links seems really big to me for R4 tires. I ran 5/16-inch on my 650 for years, different tire though.
2-linkladder.jpg
 
   / 3/8 inch tire chains #2  
We run 3/8" dia. chains purchased from JD on the rear R4 tires of our 3320 when we blow our gravel drive.

The ride is bumpier on hard frozen ground or the concrete garage floor but not noticable on snow or unfrozen dirt which the chains press into.

Because of the bumpy ride & looseness of the chains we do not go above 5mph with them on.

Hope this helps.
 
   / 3/8 inch tire chains #3  
I run Vably ice chains on an M-5040 bota(square mat) now that is a rough ride. I think if they are not square mat they will ride fairly smooth.
 
   / 3/8 inch tire chains
  • Thread Starter
#4  
Thanks guys. Maybe I should go to 2 link instead of 4 link? Most of my plowing is on hard surface.
 

Tractor & Equipment Auctions

500 BBL FRAC TANK (A58216)
500 BBL FRAC TANK...
2022 Deere 325G (A57148)
2022 Deere 325G...
2020 MACK GRANITE (A58214)
2020 MACK GRANITE...
2015 International Durastar 4300 SBA 4 x 2 Water Truck, VIN: 3HAMMMMN4FL510006, Cummins Turbo Die... (A59076)
2015 International...
2025 GPS Trailers (A56857)
2025 GPS Trailers...
CATERPILLAR 255 SKID STEER (A52709)
CATERPILLAR 255...
 
Top