2T75N-U Bore

[Neat 1500]

All, has anyone pulled a head from their YM146 or GT14? reason i ask is i want to know if they are sleeved bores or not. i suspect they arn't but want to confirm this as i want to re-ring mine and hone it to slow the smoke down as one of it's rebuild projects. next thing will be to find out if rebuild parts are available still.

 

[winston1]

Am I wrong or should your engine model be 2T75U-N. If that is correct then according to this parts pdf you have no sleeves. See figure 19. http://downloads.pfgaustralia.com.au/intranetwebcache/Parts/Parts Manuals/Yanmar/Y00T2310.pdf

 

[Neat 1500]

Am I wrong or should your engine model be 2T75U-N. If that is correct then according to this parts pdf you have no sleeves. See figure 19. http://downloads.pfgaustralia.com.au/intranetwebcache/Parts/Parts Manuals/Yanmar/Y00T2310.pdf

Haha yeah you are right, bit of dislexyia on my part. i forgot about that site for info and it does appear to have a solid bore as i suspected. now to source some rings and bearings :thumbsup: and another thing i just remembered i have the full manual for it too :confused2: