2320 & 200 cx loader

[unreconstructed]

Have been thinking about buying a 2320 which I will use for mowing more than anything else but am not sure I want the loader ( I have 5203 w loader). But I figure that the loader might come in handy in some tight spots. The 200cx according to the JD website is a quick park, but it seems like I read a post on TBN the other day that stated that the 2320 did not accept a quick park loader.

If anyone could clear that up for me, I would appreciate it. I don't want a permanent mount loader.

thanks much./

 

[cast_and_blast]

The 2320 takes the exact same 200CX loader and it is "quick park". I'm not very fast at taking mine off and it takes me less than 5 minutes (on or off).

Scott

 

[ducati996]

Its my understandiing the 200cx is the quick park loader - which fits on the 2320 just fine. The 200x loader is a fixed mount and not quick park or easy to remove as the CX loader.

 

[Hard]

The 200cx is quick park. I have one.

 

[johndeere_2320]

Got a 200CX loader on my 2320 and it's certainly quick, may be 2-3 minutes attach/detach.

 

[unreconstructed]

Thanks for the replies, fellas. The write ups about the 2320 all look good--I didn't really want to spend for the next size up, especially since I have a 5203 in my employ.

Am thinking of getting the 54" rather than the 60" which would get in a little tighter spots.

 

[Nuru]

Got a used 54" for my 4100 and i fought off all the urges to go to the 60". And i had a lot of them. Even fought off the urge to trade my 4100 in on a 4115 and 72" mower deck too.