Kyle_in_Tex
Super Star Member
My company's 2305 has developed a hydraulic whine. It has about 500 hours on it. The hydraulic oil, filters and screen were changed/cleaned about 50 hours (of use) ago.
The unit does not have an FEL, nor any rear implements used. Just a 3 blade belly mower deck. The deck doesn't seem to raise very much. I'm thinking I can use the adjustment hangers to raise it some more. The hydraulic cylinder does not seem to fully move up or down. Anyway, the operator noticed a whining noise getting worse and brought it to me to diagnose. I put my mechanic stethoscope on the selective control valve and there is a matching whining noise coming from it. Has anyone rebuilt one of these? It looks like some simple parts. Do you have to take off the ROPS and the Green fender/seat to get at it?
The deck is raised by the selective control operators joystick. There is only 1 hydraulic line plugged into 1 of the 4 ports. It does seem to raise erratically (dropping and raising) if you slowly move the joystick from center.
Just wondering if anyone else has seen any of these symptoms.
Thanks.
The unit does not have an FEL, nor any rear implements used. Just a 3 blade belly mower deck. The deck doesn't seem to raise very much. I'm thinking I can use the adjustment hangers to raise it some more. The hydraulic cylinder does not seem to fully move up or down. Anyway, the operator noticed a whining noise getting worse and brought it to me to diagnose. I put my mechanic stethoscope on the selective control valve and there is a matching whining noise coming from it. Has anyone rebuilt one of these? It looks like some simple parts. Do you have to take off the ROPS and the Green fender/seat to get at it?
The deck is raised by the selective control operators joystick. There is only 1 hydraulic line plugged into 1 of the 4 ports. It does seem to raise erratically (dropping and raising) if you slowly move the joystick from center.
Just wondering if anyone else has seen any of these symptoms.
Thanks.
