22MM Pressure Washer Fitting,, Need Help Finding

CADplans · Apr 15, 2019

I purchased a wheeled, deck cleaning attachment, and a 12 foot extendable wand,, in hopes that I could pressure wash a metal roof before painting.

The hope is that I can pressure wash without being on the roof,, I don't trust myself with a 4,000 psi pressure washer,, while standing on the roof.

The problem: both the wheeled deck, and the wand have identical 22MM threads, I have not been able to find a union fitting.

The threads on both items look like this,,,

So, the fitting I need is the opposite of the fitting in the pic above.

Everybody sells the pictured fitting,, but, the opposite fitting seems to be eluding me,,,

Am I looking for a unicorn??

BrinkME · Apr 16, 2019

pretty much yes, a unicorn.

Really the only options are to make an adapter by putting 2 readily-available adapters together

CADplans · Apr 16, 2019

BrinkME said:
pretty much yes, a unicorn.

Really the only options are to make an adapter by putting 2 readily-available adapters together

I did see the NPT-M adapter, then went looking and found the 3/8 NPT-F adapter,, so I ordered both,,,
I hope that works,, am not familiar with this 4,000 psi water stuff,,, :confused2: