TSMART
Silver Member
Cold start, no tach. Comes on after an hour, florida climate. I removed fuses, cleaned and replace. Same thing happens repeatedly, all other gages fine. Im stumped.
224 Tach problem
- Thread starter TSMART
- Start date
- Views: 815
stevem5215
Platinum Member
- Joined
- Jul 9, 2006
- Messages
- 969
- Location
- Pittsburgh, Pa
- Tractor
- Steiner 420 - Black Craftsman Pro 24hp - Simplicity 48 ZT-2500 - Simplicity Citation XT 61" - Chainsaw CS-5720 - FarmerTec G660 90cc's
I believe the tach has a sensor up by the flywheel. Probably just a bad chinese part.
Steve
Steve
TTTTTT
Gold Member
Might be just bad setting on the sensor. Back off the sensor. Gently screw it back in till it just touches the flywheel, then back it off, I believe about a 1/2 turn. Try that.
Dave
Dave
