2210 implements

[shager]

What size bush hog and disc should i use with my 2210 tractor?
Also i have a 5 ft yanmar tiller that sometimes when i am using causes my tractor to run hot am i overworking it, to fast or do you think there may be another problem. It takes about 20 minutes of tillibng in red clay to get too hot.
thanks steve
/forums/images/graemlins/smile.gif

 

[mark777]

Shager,

IMO: Your tractor should be very capable of handling just about any 5' implement. I suspect you may have a cooling problem or perhaps too much anti freeze? What gear are you using the tiller in, and what speed is the PTO set at?

Regards, Mark

 

[shager]

Mark,
the 2210 has so many gears to choose from, i'm pretty slow but i do have almost a pure mixture of antifreze in the radiator. guess i should add some h20. what is best mixture?
Steve

 

[shager]

also where is the pto adjustment? where is best place to get an ENGLISH manual?

 

[mark777]

First thing...Drain the radiator and use a 70% water 30% Anti Freeze mixture. If your exposed to extreme cold than a block heater, oil radiated heater and blanket, our another source of outside heat is preferable to excess anti freeze.

A manual is available from many dealer-members right here on TBN. A general location added to your profile will help you considerably.

As for selecting the correct PTO gear and RPM for your model, I am sure someone will chime in with what works best.

Mark

 

[thegreatrandini]

I think adding some water will work.. Only operate american implements on pto gear 1.

 

[JerryG]

You need to go to a 50/50 mix on your anti-freeze. Any more and it won't cool as good. If that doesn't do it, then the tiller is to big for your tractor, given that type of soil. BTW, JD recommends a 48".