double hunter
Gold Member
- Joined
- Nov 2, 2010
- Messages
- 431
- Tractor
- Ford 1715
MY neighbor has a JD2150,,it has started leaking oil out the top of the steering column,,I have been told there is a seal at the top of column, any help appreciated
2150 leaking oil out the top of the steering column
- Thread starter double hunter
- Start date
- Views: 15480
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,563
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
There is a seal kit, JD part # AT26188 listed for that column.
And you can go to jdparts under model 2150 to check out the parts in that column..
John Deere - Parts Catalog
And you can go to jdparts under model 2150 to check out the parts in that column..
John Deere - Parts Catalog
Tx Jim
New Member
Yes there's a seal below steering wheel but replacing that seal may or may not stop leak.Seal part number is T22260
Every seal in it will need to be replaced if he has a chance of stopping the leak. I tried replacing just the six o-rings in the top side and it lasted all of 1 day. Had to get another kit and completely disassemble the thing. There's a video on YouTube of a guy removing one and rebuilding it. He needs to watch it. It's not an easy job.
Tx Jim
New Member
One doesn't have to remove valve housing from tractor similar to U-tube video to install seals. Remove steering wheel then remove large nut then set steering wheel back on shaft,turn steering wheel CCW& shaft with valves will come out of housing. Then the 6 large o-rings can be replaced being careful to get o-rings in proper locations. If valves & other components are removed from shaft be sure & document proper location of shims & valve bodies.
Zebrafive
Super Member
Thanks for the useful post. I hope I never have to do this repair
Tx Jim
New Member
DISCLAIMER: the six o-rings can be replaced as described above BUT replacing them isn't an easy task!!
