1967 Mitsubishi S-670 D

   / 1967 Mitsubishi S-670 D #1  

sarayeager

New member
Joined
Mar 25, 2018
Messages
3
Location
SPRING
Tractor
Mitsubishi Satoh S 670 D
I am looking for 2 front rims for 7-16 tires. Mine have bad rust spots at the stems.

I am also looking for 2 other parts. 1. The mushroom shaped cap for the air intake
and
2. The 90 degree part that bolts to the engine block that the muffler mounts onto.

Anybody know where I can find these?
 
   / 1967 Mitsubishi S-670 D #2  
Them rims are scarce and high. You could have old hole welded up and drill another hole somewhere else. Or cut center of rim out and weld another rim to your center.
 
   / 1967 Mitsubishi S-670 D #4  
I am looking for 2 front rims for 7-16 tires. Mine have bad rust spots at the stems.

I am also looking for 2 other parts. 1. The mushroom shaped cap for the air intake
and
2. The 90 degree part that bolts to the engine block that the muffler mounts onto.

Anybody know where I can find these?
Deere LVA13634 rims. According to online specifications, they are 5X14 rims size with 6X6” bolt circle and 4 5/8 center pilot hole. These specs are identical to the original Satoh Mitsubishi spec’d rims for the S670D.

Not sure if the 4WD front rim would work on a 2WD, but the Deere rim fits.

If the rims don't match, then there is a company that will get you there with new ones.

 

Tractor & Equipment Auctions

2010 40ft Qingdao Refrigerated High Cube (A35430)
2010 40ft Qingdao...
28" x 90" Work Bench (A36337)
28" x 90" Work...
Clark C25 Fork Lift (A35915)
Clark C25 Fork...
40' High Cube Container (A36337)
40' High Cube...
72" Hydraulic Snow Blower (A36337)
72" Hydraulic Snow...
20' Container (A36337)
20' Container (A36337)
 
Top