1950FergieMike
New member
I can't get the choke to work after rebuilding the carb. The flapper won't flap. I put it back together every way possible and it won't move. What am doing wrong?
1953 Fergurson TO-30 choke replacement?
- Thread starter 1950FergieMike
- Start date
- Views: 2419
banjodunn
Veteran Member
G'day don't know how you could get it wrong you pull the choke knob and the butterfly shuts!! Don't mean to sound rude but I cant think of any way you could go wrong can you put up a pic of your carb and linkages we might be able to see the problem.
Jon
Jon
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
did you put the butterfly on the wrong side of the choke shaft?
install shaft opposite side?
install shaft opposite side?
OP
1950FergieMike
New member
I can't install the butterfly on the wrong side of the shaft because the screws are on the outside side of the throat. Can't install shaft on wrong side because its only open on one side.
OP
1950FergieMike
New member
Your not being rude. Lol. Here's a couple pictures.
OP
1950FergieMike
New member
OP
1950FergieMike
New member
I posted a couple pictures. The choke shaft will not move when installed like the pictures or with the butterfly other other way with the 10 at the top. The 01 in at the bottom in the picture. It won't move in either direction.
banjodunn
Veteran Member
G'day I have to agree with soundguy I think, I reckon the butterfly screws onto the other side of the shaft will be a PITA to put the screws in but I think he is right. I thought I might have had a carb here I could look at but can't find one.
Jon
Jon
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
only reason i mention it is i have bought a rebuilt carb that had it on like that...
DJ54
Elite Member
- Joined
- Jan 20, 2009
- Messages
- 4,589
- Location
- Carroll, Ohio
- Tractor
- IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans
I'm thinking you need to remove the choke disc, let the choke shaft rotate ahead a bit, getting past center, then reattach the disc. Aren't the choke disc's elongated a tad, so as to pretty much close the hole at a slight angle..??
Looking at generic pics of a TO20's carbs, the tang on the choke shaft is rotated forward a good bit. And being the return spring on yours has it at full choke, I'm guessing the disc is elongated enough to prevent it going on O.C.
Granted, you may have to release the return spring, or hold the tang with your finger, until you get the disc reattached, but thinking that is the problem.
Looking at generic pics of a TO20's carbs, the tang on the choke shaft is rotated forward a good bit. And being the return spring on yours has it at full choke, I'm guessing the disc is elongated enough to prevent it going on O.C.
Granted, you may have to release the return spring, or hold the tang with your finger, until you get the disc reattached, but thinking that is the problem.
