1710 Ford Tractor!!

   / 1710 Ford Tractor!! #1  

Fishman1227

New member
Joined
Nov 23, 2013
Messages
21
Location
Cassville
Tractor
Ford 1710
I have a 1710 Ford Tractor. I want to know, can I add a remote Hydraulics for the rear of this tractor? It has already a front end loader on it now..

Thanks
 
   / 1710 Ford Tractor!! #2  
If you have hyd on it now, is it easy enough to add to the hyd system.

Tractor Data says you have a total pump flow of 7.8 GPM.


Is this a new type loader valve, with a PB port, and if so, you can add a remote valve.
 
   / 1710 Ford Tractor!!
  • Thread Starter
#3  
Ok, I'm not sure about that. What is a PB port??
 
   / 1710 Ford Tractor!! #4  
If you have a loader valve with PB, you will have seven hoses.

You may have the PB port and not using it.

Look on your valve and see if there is a stamped PB by one of the ports.

PB is used to pass fluid to the next valve.

Valves with out PB use the return port to pass fluid to a tank/reservoir.
 
   / 1710 Ford Tractor!!
  • Thread Starter
#5  
Ok I will go look!! We just got done with a 13" snow.. so it will be a bit before I post back!!
 
   / 1710 Ford Tractor!!
  • Thread Starter
#6  
It has 4 coming from the side and 2 from the bottom with a fill line from the trans. Looks like you could add one more if need be, but I'm not sure.
 
   / 1710 Ford Tractor!! #7  
I have a 1710 ford tractor with 3 lines coming from the transmission to the control valve for the front loader.Can I hook into 2 of these lines for a 3 point hitch backhoe?If so which lines do I hook into?
 

Tractor & Equipment Auctions

John Deere 5090E Tractor with Loader Prep Package, 2 Rear Remotes, Warranty Until 2028 (A51039)
John Deere 5090E...
71057 (A49346)
71057 (A49346)
2018 GMC Sierra 1500 4x4 Crew Cab Pickup Truck (A50323)
2018 GMC Sierra...
2012 INTERNATIONAL 4300 26 FT BOX TRUCK (A51219)
2012 INTERNATIONAL...
DITCH WITCH R300 STAND ON TRENCHER (A51242)
DITCH WITCH R300...
2015 CAT 573c Fellerbuncher Cutter (A48836)
2015 CAT 573c...
 
Top