12 ft Wheel disk...Can I pull it ???

[N401pf]

Greetings

I own a John Deere 1530 with a total engine HP of 45 and a drawbar HP of 38.. Now
I just got a deal on a JD 12 Wheel Disk Will I be able to pull this much? I have been told NO looking for other opinions

Thanks

Scott

 

[Egon]

It all depends on your local conditions and what you want to do with it.

If you have weight on it a good angle and working in nice black dirt be prepared to sit in one spot.

 

[Gale Hawkins]

As long as you keep the wheels down.

7 to 8' is typically the functional limit .

 

[RickB]

You probably could pull a light duty finishing disc on level ground (maybe). A heavy 12' double offset or single offset disc would be a load in transport position.

 

[flusher]

Greetings

I own a John Deere 1530 with a total engine HP of 45 and a drawbar HP of 38.. Now
I just got a deal on a JD 12 Wheel Disk Will I be able to pull this much? I have been told NO looking for other opinions



Thanks

Scott

I'm able to pull my 13-ft Minneapolis Moline KS1300 wheel disc in dry soil conditions with my 2008 Mahindra 5525 (55 hp engine, 45 hp pto). I cut it down to about 8-ft wide so I can handle soft soil and it works fine.

Good luck.

 

[Verticaltrx]

I doubt you'd get much use at all out of a 12' disc behind that tractor. A nice heavy 6-7' 3pt disc would be ideally suited to a 1530.

 

[Gale Hawkins]

I agree.

It seems like cutting out the tractor tracks by 6-12" on each side about catches it for most small tractors.

We had Ford Flex-I-Hitch 6.5' and 7.5' disks for our Ford 801 tractors and when cutting to the axle with a drag in 3rd gear they got a work out.

 

[Robert_in_NY]

If you got a good deal try trading it for an 8' unit as your tractor will be much happier with that size.

 

[MHarryE]

I have a 13 foot Case tandem disk for my Kubota L5740 and it is about all I can handle. I also have a 6.5' 3 point that I bought for my L3710 before trading it on the larger tractor. The small disk was rights for the small tractor - it would never have pulled the tandem wheel disk. I have about 1,000 pounds extra weight on the tandem so it cuts in really good but more power would be nice.

 

[N401pf]

Hey Guy's I finally found a 8ft RWA with 19 new baldes on it, good cylinder for 1000.00. Any suggestions on where to pickup up some replacement scraper blades and bracket's??? Thanks

 

[cowski]

john deere dealership

 

[flusher]

Nice looking disc.
Check the JD website for parts info.
Otherwise, fabricate them yourself.

Good luck.

 

[N401pf]

Dealer can get them out of Dallas, 39.13 each Ouch, Looking for other options

 

[Robert_in_NY]

Dealer can get them out of Dallas, 39.13 each Ouch, Looking for other options

They last a long time though. Fix it up right and it will last you a lifetime.

 

[ovrszd]

Wish you were on the other side of the State, I'd talk you outta your 12'.

 

[kf4uda]

I have bought parts for tillage equipment from Shoups and have been very satisfied. Here is a link to John Deere disc scraper parts: Disc, Vertical Tillage - Shoup.