spindle

I replaced the front tires, and the C clips are worn out. The spindles themselves are a bit worn and I thought "hey maybe I should replace the spindles TOO!" Well...I look online and they are pricing them at $358 EACH. :eek: Suggestions? I could probably get them fabricated for cheaper. Seems...

...

Any of you guys have any experience rebuilding mower spindles? I’ve got one out of three spindles possibly bad on my tractors mower. Lots of up and down play that I don’t think any amount of tightening is going to fix. ( could be wrong) What typically causes this kind of wear? I’ll have to...

A local mining historic site was unloading some artifacts with maybe 300 lbs in the loader bucket when the right front spindle broke off, taking the wheel and tire with it. There does not seem to be a Branson section here, does anyone know if this is a common failure? I wonder if Branson parts...

Has anyone here replaced the front spindle bushings Part No 8 in the attached parts diagram? Wondering how much trouble they’re going to give me coming out, and hoping I can dive the lower one out with a good sized drift. Looks like a poor design to me. No provisions for lubrication, and it...

I can't see a way to get to it while mounted. Might be possible with a 90 degree fitting so I have one ordered. But I got to wondering about if it might be possible to drill a hole in the tractor floorboard directly above it and use a longer fixed tube. I haven't explored it yet to see what...

Threads went out in spindle, no welder,is there any way to repair threads,don't think can re-thread existing size with a tap. thanks

Ok - i'm pretty good at finding parts. Bought this 6' finish mower from a guy that said he bought it new in 1991. Great price, and one spindle bearing is bad. No biggie i'm thinking. Ordered a re-build kit off ebay. Then took apart the spindle waiting for parts. Parts show up - problem. The...

I've got a Spartan SRT-XD 72" zero turn and I noticed a bent spindle this weekend when I was getting it ready to mow. Have any of you replaced spindles or shafts? I wonder if there is an aftermarket spindle that is worth a hoot? They are pricy from Spartan. Just the shaft is about $65 and I...

Hi guys, I need some help or advice. I have a mid-sized 2000 Terramite 2 wheel drive backhoe, model T5D (Terramite then changed the name from T5D to T7 around 2000 too and that further complicates my life...). Basically my front spindles are shot. I've replaced some smaller parts that effect...

I am in need of a Yanmar F18 front left Spindle. Part # 194420-11800 I ordered a spindle from Hoye tractor parts but the spindle I received was 3/4 of an inch to short. Any help with this is much appreciated. Ben

I have a Woods RD990X finishing mower that needs new blades. Problem is, the present blades haven't been changed for years and after removing the bolt that holds the blade's pin lock and removing the lock, the pins the blades pivot on won't come out! I suspect they're likely rusted in-place...

I have a Massey Ferguson 2706e and have been using a 5' finish mower behind it that my dad had sitting around for a while. I am looking to get something bigger/ more appropriate size for the machine so am looking at 7'-8'. I already have a 7' twin spindle rotary cutter i use for rougher uses...