oil

In the boating community they usually say change oil at the end of the boating season and before winter. I always wondered what happens to oil during a cold winter. Does it get water in it from condensation? Does the oil quality degrade over cold winter conditions? So I was thinking maybe its...

Just purchased a 92 Rhino JM-204 and need info on oil filter number and anything else ya'll can help me with. Thanks 🤠

So both warning lamps came on at same time. Shut off and restart, lamps are off. After a few minutes, they both come back on. No change in performance, but too worried to keep going. Anyone else had this happen? Possible causes?

What is the correct oil to use in my 25 year old 19hp, twin cyl, air cooled Generac generator. This is from the old days with higher ZDDP in the oil and I don't want to screw up my house generator with modern oil. The generator has test run more than actual use and only has maybe 15 hours of...

good morning everyone, After a long day of bush hogging, I noticed a small drip of rear end oil leaking out of the washer around the break/ clutch pull rod on the left side of the rear end, I loosened the nuts and pulled the washer back to clean everything up and made sure to...

New to me B2150. Going thru everything as a few things were neglected by previous owner. Oil pressure light doesn’t come on with key. Pulled dash hoping it was bulb, but bulb confirmed good. Sending unit or something else? Are they a generic item or Kubota only part? Appreciate any thoughts!

Hello Tractor friends. I just bought a 2022 Deutz-Fahr Deluxe cab, loader tractor for @30K with only 325HRS perfect shape, extra front hydraulics. I want to change the oil and cannot find any oil or fuel filter part numbers. I was hoping someone has the same Deutz-Fahr 5080M Keyline and could...

No change for oil in the future if electric is the way. Electric tractor. No hydraulics needed

If you use the same brand and weigh you only need to change filter once a year, we ran 2 motors over 500tho miles this way, oil sludge is caused by mixing weighs and brands, alot of miss guided mechanics out there. My dad Was a mechanic and was taught this in school, he would always say the...

I realize I might be opening a can of worms here, but I am curious by nature. I notice that different oil filter makers list filters for engines and...... 1) they will be made from different filter material (assumed) 2) will have slightly different shapes 3) will have a central hole the...

My L4701 just went over 200 hrs. Did the initial 50 hr. oil and filter change. I used premium oil and Kubota filter. The owner's manual says to change oil every 400 hrs. It has been 15 months since the original 50 hr. oil change. Oil still looks okay, darker, but not coal black from soot...

Last few years noticed some oil filter cover plates have rectangular openings vs circular, for both engines and hydrostatic drives. The filters are the same size. I believe the relief spring, bypass valve, threads, similar media etc are the same. To put my mind at ease, if original filters used...

Ive only just learnt that you need to use special oil for diesel after I've changed my engine oil. The one I've used isn't specified as as SAE and recommends not for heavy duty diesel Is this a problem? Should I change it? Nulon Apex+ Full Synthetic 5W-30 Long Life Engine Oil 5L - APX5W30D1-5

Hello, I have a Shibaura SD1840 (LET802C). The other day while driving, all of a sudden the oil dip stick blew out. Obviously there is a high oil pressure in the engine carter. After searching the Internet I suspect that the oil relief valve could be the problem. However I have no clue where to...

I have had a RMD2584 for 11 years and it works fine and has maybe 500 hours on it right now. I am considering changing to gear case oil in it. I can't figure out how to empty the gear case as there is a dipstick hole on the top and a hole in the side for the level, but nothing on the bottom to...

I can not seem to find how to check the level of the oil in the front axle of my 4720h. I see the fill plug on the right side hub, but no stick or level check bolt?? my hubs leak a little bit and i want to make sure I keep it topped off. also, it says 80/90 on the fill plug, but the manual...

Without buying oil at 2x the price at a dealer, what do most of you use for your small JD diesel tractors? I have a 2305 and an x745 mower. Yanmar 24HP engines (as I recall). We live in Missouri, summer mowing can be in the 90's, and the tractors get little use after November, so I don't worry...

Need a little assistance finding Temperature Sensor and Oil Sending unit and getting them wired back up. Several years ago parked my Kubota M4800 in a 3 wall dirt floor garage and rats chewed on the heart of the wiring harness in the dash leaving lots of bare copper exposed. At that time the...

I am wondering if anybody knows what oil to use in kohler k321. I live in Ohio and it gets cold but not freezing most of the time in the winter. I know I need to use detergent oil for tappet head in the older engines, does anybody know the oils I should use, do you also know a brand I could use...