massey ferguson 205

  1. T

    Looking for a dynamo for a MF 205

    If anyone has replaced a dynamo on a M-F 205 and has some advice on what they did I would sure appreciate it.
  2. Johnson8

    Massey mf 205

    So I just acquired a Massey Ferguson mf205 I was told it ran hot so I tore it down to find the head is pitted to bad to be machined but the bottom end of the engine looks good other than it needs rings I’m only $400 deep in the tractor but if I would’ve known how hard toyosha parts were to come...
  3. F

    MF 205 rear axle seal

    Has anyone replaced an axle seal on one of these Massey Ferguson 205, 210 or 220 tractors? I want to know the steps to get the seal out and what the correct seal is. I don't know how to remove the axle shaft.
  4. F

    MF 205 rear axle seal

    Has anyone replaced an axle seal on one of these 205, 210 or 220 tractors? I want to know the steps to get the seal out and what the correct seal is. I don't know how to remove the axle shaft.
  5. C

    MF 205 Industrial leaking ATF at inspection plate

    Hi all, This is my first post. My name is Rick and I'm from NE Texas. I have an old 1961 MF 205 industrial with the insta-reverse transmission. Anyway, I was working the tractor running a disc, and then I started to lose speed. I looked under the tractor and I had a pretty steady stream of...
  6. C

    MF 205 4wd engagement...

    Hi All ! let me first say " thanks to all of you that have the patience to answer some pretty ridiculous question's" These forums are the first place i go when researching a problem fix, or looking for critical information...Thanks This leads me to my inquiry. I was recently gifted a...
  7. C

    MF 205 4wd engagement.......??

    Hi All ! let me first say " thanks to all of you that have the patience to answer some pretty ridiculous question's" These forums are the first place i go when researching a problem fix, or looking for critical information...Thanks This leads me to my inquiry. I was recently gifted a...
  8. H

    Massey MF 205 Steering Parts

    Hey all, I have a MF 205 - 1981 I think - that the front end/steering is shot on. If you hit a rut or bump and you're not careful it'll almost break your arm. Other than that, it's a great little tractor. Problem is I'm having trouble finding information about the front end and also repair...
  9. B

    mf 205 loader backhoe trans problems

    brand new to this site tractor has shuttle system reverse works but forward does not I replaced trans pump and torque converter hub any ideas? thanks ben
  10. D

    MF 205 Diesel Question

    You may recognize from previous posts that the head on my MF 205 diesel manufactured by Toyosha cracked and I had some difficulty locating a replacement, AGCO no longer stocked them as OP. Thanks to a few of you I was able to identify the make and model of the engine and did eventually locate...
  11. D

    Need cylinder head for MF 205 diesel

    Would you believe it from my most recent posts I was looking for a rototiller that my MF 205 could handle. Yesterday as I was cutting tall grass with my belly mower with a new belt and 3 new cutting blades, it started to steam from under the hood. The stem and cap from the radiator had blown off...
  12. D

    Rototiller for MF 205

    I have the small diesel MF 205 with a belly mower. Did MF or anyone else make a rear attaching rototiller that ran off the rear PTO for this tractor? Thank You
  13. D

    MF 205 diesel with belly mower

    I tried to submit a new thread and my connection to internet bottomed out. Not sure this got posted and I did not see it on the recent list. Have a 205 diesel MF and have lost one of the mower deck blades. Since I bought it used from a MF dealer now closed, but he still does work etc, we had no...
  14. S

    MF 205 Hyd question

    I have a 1979 MF205 that shares hydro with trans, I have a FEL and was wondering how to get more lift capacity. There is a diverter valve for 3 pt and hydro hoses for fell run from it, would upgrading the lift cylinders do the trick or would I have replumb the fel with larger lines? Also where...
  15. C

    massey ferguson 205

    Hi there my name is cliff and love to play around with massey ferguson tractors I don't have farm any more so just fix them up plow drive way .I have 202/205/3165 massey ferguson
  16. S

    1978 MF 205 Flfit capacityEL

    I have a MF 205 with a MF FEL any advice on the lifting capacity?
  17. J

    MF 205 Industrial Proofreader

    So my tractor doesn't have this, and I was thinking, after I overhall the engine, I'd like to somehow keep track of the hours for maintance purposes. So I began looking for the thing that goes in the center of my instrument panel, the large hole, where I I just have a metal cap now. I found a...
  18. N

    looking for advice on a 1965 MF 205 industrial tractor

    Hey all, I'm a new property owner looking to turn my 30 acres into a small farm. I've been looking for a moderately sized diesel tractor with wide front end and a loader that I could run various implements, post hole digger, brushhog, etc. I have a lot of mechanical experience with cars and...
  19. D

    Oil & Fuel  MF 205 compact diesel question

    Just acquired a MF 205 compact diesel tractor. Does anyone have a guess on age? The Series # is 2745, the Serial # is 00508. It is a 2 cyl Japanese diesel built by Toyosha Hinmoto, sometime in the mid 80's, as far as I can determine.
  20. M

    Price Check  Massey Ferguson 205 price check

    I found this by the side of the road. They are asking $4500 with the 5' finish mower. It is very clean, but I 'm not sure it's worth that much. So far I know.... It's 23 yrs old It's a 2 cylinder diesel It's very clean, well greased, and has new filters Some new spindle bearings on mower Front...
  21. 1

    Engine for 1981 massey ferguson 205 2wd

    Looking for a working engine for a 1981 Massey Ferguson 205 2wd tractor to buy.
  22. L

    MF 205 Info

    I'm considering a MF 205 for mowing a flat 4 acre field. Does anyone have information on this tractor, common problems, concerns, etc? Thanks in advance. mark
Top