massey ferguson 1010

  1. Z

    MF 1010 4WD Hydro rear wheels / rims

    Hello, I picked up a 4WD Hydro 1010 last year and it had been sitting / sinking into the ground for a few years. Between the filled tires leaking and the rims being underground they have now rusted to the point of failure. I've been searching for replacement rims and I'm striking out. I know...
  2. J

    MF1010 no fire to switch

    Mt mf1010 is getting no fire to switch. New battery, good ground, fire to starter but thats all. For a while horn would blow but now nothing. Its like battery is disconnected.
  3. G

    MF 1010 hydro...fatal?

    Started my 1010 (1992?) and pointed it up the driveway to move a little snow when I heard a metallic pop. The go peddle stopped working and after removing the cover a saw the trunnion lever flopping around off of it's pivot. Looks like the lever not broken but haven't gotten further , (72 year...
  4. Y

    MF 1010 rear tire spacers or sway chains advice needed.

    Hi, I have an issue whit my rear tire chains, they are too close to the sway chains, cutting into them badly, i think adding spacers will increase the gap and avoid such a mess, or welding another hook point on the lift arm. if anybody have a link to spacers or solution please share, any help...
  5. M

    Massey Ferguson 1010 hydraulic filters

    Need help finding the hydraulic filters for Massey Ferguson 1010 compact tractor
  6. S

    MF 1010 steaming around radiator after running.

    No leaks detected What ant freeze and ammount is suggested
  7. H

    MF1010 fuel gauge not working

    Truth us, it never has in the 13 yrs I have owned it. I would like to resolve that, but I know very little about the systems. Not 100% sure how they work. So I would greatly appreciate any insight on how to troubleshoot one. For the last 8 or so years, I have used one of those spiral gauges...
  8. R

    Massey Ferguson 1010 Tires

    I have a 4x4 Massey Ferguson 1010 with 21x8.00-10 front tires. They have discontinued that tire and are recommending the 20.5x8.00-10 tire. The problem with that tire is that the choices are limited. Is going with the 20x8.00-10 to big of a reduction in diameter? I do not want to hurt the front...
  9. J

    Rebuilding Electrical on MF1010

    I am bringing back to life an old MF1010 4WD tractor. In the process of restoring the electrical system. The regulator rectifier was zip tied hanging from the tach cable when I got the little guy. It appears that the firewall has some matching holes for the location of the regulator. I have...
  10. J

    Need Lower rad hose for a Massey Ferguson 1010

    Does anybody know where I can purchase a lower rad hose for a Massey Ferguson 1010? or the part number? I am in Canada. Thanks in advance?
  11. J

    Massey 1010 w/ 2 piece front wheels

    Looking for any guidance on changing front tire (turfs) with two-piece wheels on my Massey 1010. I haven't been able to find torque specs for the nuts/bolts that hold the two halves together. I haven't taken apart yet, but tire is completely deflated. Any tricks to know about? Does the bead seat...
  12. J

    MF 1010 - Front Two Piece Wheels

    Looking for any guidance on changing front tire (turfs) with two-piece wheels on my Massey 1010. I haven't been able to find torque specs for the nuts/bolts that hold the two halves together. I haven't taken apart yet, but tire is completely deflated. Any tricks to know about? Does the bead seat...
  13. K

    massey Ferguson 1010 hydraulic filters

    Hi, I'm changing the hydraulic oil in my MF 1010. Does anyone have the after market parts # for the three filters I need to replace? thanks Kal
  14. H

    Mf 1010

    Anybody have a picture of the shift pattern
  15. M

    Installing a new Voltage Regulator on my 1986 Massey Ferguson 1010 2 wh Tractor

    Hello, my name is Mike and I have a 1986 Massey Ferguson 1010 2wheel tractor. I recently had an issue with bare wires shorting out and burning up the voltage regulator and connecting wires. Upon searching the subject I came upon post from SnowHillMan regarding him replacing the voltage regulator...
  16. G

    MF 1010 electrical help? No Start mystery

    1990(?) MF 1010awd. 570hrs Tractor started with 9yo battery once after sitting for months. Few days later , completely dead. no dash lights for glow etc. New battery, Dash lights light up bright and then fade then dead. Thinking it was a bad unit I returned and exchaAnnged. Same results. So...
  17. G

    Oil & Fuel  Massey Ferguson 1010 Fuel Line?

    Started my 1010 after about 2 months and noticed a pinhole leak in the fuel line just before it goes into the rear most cyclinder. This line is at least 25 years old and looks like a simple hose with three junctions where it turns into each of the three cylinders. Any tips on finding this...
  18. T

    Massey Ferguson 1010 will not start

    Just picked up a project Massey 1010. Real clean machine. Prior owner could not get it to start after sitting a few years. He thought low compression. So... He supposedly replaced the rings, bearings and honed the cylinders. It won't start for me either, it will hit a few times with light either...
  19. S

    MF 1010 Charging issue

    Hello, I purchased a new battery for my MF 1010 earlier this year. When I tried starting the tractor today, it turned over few times and then clicked. The battery showed 11.8 volts. I jump started it and then checked the voltage across the postive/neg terminals. It showed 12.4. When I rev'ed...
  20. 6

    Massey Ferguson 1010 Electric PTO Adjustment

    Hello, I recently purchased a 1986 Massey Ferguson 1010 with a front mounted snowblower. The front electric pto stopped working, and after checking the wiring I decided it must be the clutch. I tried adjusting the clutch but I couldnt get it to engage. Does anyone know how to adjust one of...
  21. R

    Massey Ferguson 1010 Cooling & Oil Systems

    Can anyone tell me where the drain for the coolant system is located? Are there any recommendations for a coolant system or oil block heater?
  22. Y

    Massey ferguson 1010 hydro quick connect plumbing

    Hi, I recently got an MF 1010H , in a good shape, want to change, my setup to have a quick connect rather than a valve, witch is leaking, any help will be appreciated, do i have to install bypass valve P to T between the quick connect outputs, because i allready have a valve on my splitter. Here...
  23. B

    Massey Ferguson 1010 3 point lift not working

    Hello, I know this has been discussed because it's a common problem but I can't seem to find any answers. I have a 1010 2wd series 2961. 3 point was working and stopped from what previous owner said so I changed the fluid and filter 2 times because it was milky. It will raise up with no weight...
  24. N

    Looking at MF 1010 4wd that needs a clutch. How much should a new clutch cost?

    I saw a Massey 1010 4wd for sale for $2100 but it needs a clutch. How much should it cost to have this done?
  25. M

    Massey Ferguson 1010 3 point issues

    Hi I have just acquired a Massey 1010 with just a 3 point hitch however the 3 point does not lower, raise or hold load at all. It originally had water in the hydro fluid and I drained and put new filter on. I checked for flow on pump outlet and it flows good. Under the seat I opened the screw...
  26. M

    mf 1010 lost power

    mf Good Morning, I have a great little 1010 4x4. Recently while out plowing snow I lost all forward & reverse power. The hydraulics work great. a But I had to push it off the road. Can anyone give me your thoughts, thx Mac shortcutsack@gmail.com
  27. M

    MF 1010 4x4

    I have a MF 1010. Great little tractor. Recently I was out plowing slow and it kept going slower and slower. . Now I have lost all forward & reverse ability. The hydraulics still work fine for the 3 pt hitch & bucket in front. Any suggestion? I need to airreate a few lawns. & fertilize. Thx Mac
  28. K

    MF 1010 brake shoes

    My 1985 MF1010 4wd manual transmission , needs new brakes , the shoe on the left hand side has no shoe left at all, can anyone advise where I might get replacements and can you tell me if it is the type that you rivet new shoes onto ?? Very much appreciate any help Thanks Ken
  29. H

    Hyd question about MF1010 FEL

    When I use the FEL on my MF1010, I usually have to rev it at least to 1500 RPM to keep the bucket going all the way when dumping a load. If not it will slowly go down till about 3/4 of the way and stop. If I rev it up, it will finish out the full extension. What are my possible causes? This...
  30. H

    MF1010 conversion to altenator questions

    Mine is a 1995 MF1010 with generator. I have had the generator checked out and it is good, but low voltage light stay on until it's revv'd to around 2K. Plus it does not recharge the battery. Plus left of the steering wheel, where I assume, the regulator is, gets hotter'n crap. I would like...
  31. Charlie175

    MF 1010 Tach drive

    Looking for a 1010 tach cable. This is for an A-C 5015 but they should be the same.
  32. Charlie175

    Allis 5015 MF1010 tach drive cable

    Looking for a tach drive cable for an Allis Chalmers 5015. MF1010, Hinomoto C172/174 are same also. Thanks!
  33. H

    MF1010 bucket hydraulics are backwards

    About 6 years ago I bought a MF1010 (first tractor if case you didn't guess) and later learned the bucket hydraulics are upside down. By that I mean the cylinder sits at the bucket end of the arm and it moves as the piston extends, thus stressing my lines and making them impossible to anchor...
  34. P

    Massey Ferguson 1010 Need help please.

    My grandson took the battery out to run a trolling motor, then put the battery back in backwards. Cooked the voltage regulator and blew the link fuse ahead of the starter. I ordered a voltage regulator on line and installed it and then found the link fuse blown. Does anyone what the amperage it...
  35. R

    Implements for MF 1010

    I purchased a used MF 1010 tractor, 3sp hi and low range. 2wd. The tractor is in good shape and runs well. I had intended to get a 5ft finish mower to use it with, but got a 7ft bush hog brand turf hog finish mower for $125. That I am trying to get in shape now. I will be mowing yard grass on...
  36. W

    Massey 1010 hydraulic issue

    1982 Massey 1010 with FEL. The problem started with FEL and 3 point hitch not working. Screaming noise when you tried to use either. I rebuilt the pump because there are no replacements that I could find. FEL and 3 point still working very slowly. Changed oil and filter. Lots of dirt in oil so...
  37. H

    MF 1010 will not start

    My 1010 Diesel manual transmission all of a sudden will not start with the key. I tested the start switch start position and there is power. No power at the clutch safety switch . Checked safety switch with an ohmeter and it functions as it should. I can start the machine with a screwdriver by...
  38. J

    MF 1010 - New Member

    Hello Folks, Grew up with an MF135 on a small pecan orchard. Times have changed the yard is smaller but a little tractor is just fun to work on. Just bought a little 1986 MF1010 4X4 that needs a little TLC. Everything technically works on the little fellow. A few leaks here and there to...
  39. B

    MF 1010 Price check and parts availability...

    Hi everyone! I have a chance to buy a MF 1010 2wd, gear, with a 54" MMM. It is very clean, and it was always stored inside. Not sure on the hours. I know the mid PTO that drives the MMM is broken, and I don't know what is exactly wrong. I know it is 13 PTO hp, so not really a powerhouse...
  40. W

    MF 1010 hydraulic pump rebuild

    Good Evening Just finished rebuilding a hydraulic pump on our MF 1010 manual 4 wd tractor. The gear does not turn freely when you tighten the bolts down that holds the case together. I didn't take it apart so not sure if turned freely to start with. Thoughts on if it should turn free or what...
  41. B

    Rear Finish Mower  MF 1010 4wd hydro mower/bush hog size

    I recently purchased a 1010 and now I am search of bush hog and or finish mower. Can this tractor handle a 5 foot bush hog? Or do I need to stick with 4 foot? Thanks
  42. B

    3-Point Hitch  Massey Ferguson 1010 4wd Hydro

    Hello I am new to this forum but have reviewed posts for a long time. I just got a MF 1010 with front loader in working order, but i think i really got taken on price i paid. i have now noticed a couple leaks. I was wondering what my mower options are mid or rear and any other attachments...
  43. C

    Why did my oil filter blow off on my Massey Ferguson 1010.

    I was using my Massey when I stopped to look at something and brought it down to an idle and the oil filter came off. I backtracted where I was driving and did not find a oil trail. The filter will not rethread back on tight, but the threads on the block look good. could something be plugged...
  44. T

    massey ferguson 1010

    do you have to have the motor running to check the hydraulic fluid? I know that may sound like a dumb question but I want to make sure i dont mess something up.
  45. G

    MF 1010

    Does anyone know the compression on a MF 1010? It is a TOYOSHA, 3cyl disel
  46. T

    Massey Ferguson 1010 running problem. timer?

    Question? Have a Massey Ferguson 1010 that I can start with the gps for 30 seconds, it will run fine for 4 min. then pour black smoke out exhaust then slowly die. Can repeat process, same result. Is this a problem with my glow plug timer? If yes where can I find one?
  47. Kiotikarl

    MF 1010 engine oil dipstick

    Hi guys, Just a quick question, my uncle has a 1986 MF1010 tractor 6x2 tranny, and he asked me if i new where to check the oil, i said to look for the dipstick but he said there wasn't any. Septical that there isn't one, i went to see, and i couldn't see it either, Does anyone know where to...
  48. H

    MF 1010 and Kubota B21 Owner

    I've had the MF 1010 for about 6 years now and I have done a lot of work with it. Like the small size for tight spaces. However because of the small foot print care must be taken when working on a hill. Not a lot of maintenance, but the hydraulic cylinders on the loader have needed work...
  49. H

    MF 1010 won't run

    I have a Massey Feguson 1010 which just stopped while I was bushhogging. My first thought was a fuel line problem, as the tractor turns over fine, but will not start. I sprayed some ether into the breather, and still nothing. I checked the bowl and the filter appears to be clean. I also...
  50. W

    Oh No! MF 1010 Clutch Pedal is Flopping Around

    I tried to adjust my MF 1010 clutch pedal free play and while the pin was out of the clevis that holds it to the clutch pedal I heard a "boing." Now there is no spring return on the pedal. It feels like it has been disconnected from the clutch because the pedal does nothing. By that I mean...
  51. jb2010

    Mf 1010 Out of fuel help

    I changed the fuel filter in my 1986 massey ferguson 1010 and I didn't let the tube fill completely up and it ran out of fuel when I started it. Didnt have a clue it was a big no no. Won't crank. What do I do?? Help!! How do I bleed it? Prime it? Or whatever u do?
  52. jb2010

    Price Check  Massey ferguson 1010

    What is a good running mf 1010 2wd manual shift 1320 hrs on it worth? Everything works and it has turf tires on it that are decent. If I buy it will it handle a 4 ft bushhog/ disc/ box?
  53. jb2010

    Price Check  Massey 1010

    Moved
  54. H

    Massey Ferguson 1010 help!?

    I have a Massey Ferguson 1010, 2wd, straight shift model. It is my first tractor, as well as the first diesel engine I have ever owned. I typically service my vehicles, and mowers myself, and I have every intention of servicing this tractor myself. I guess I want to start simple. What type...
  55. K

    Massey Ferguson 1010 Hydro drive pump- transmission question

    Dear fellow Tractor owners, does anyone know the manufacturer that Massey Ferguson purchased their model 1010 hydrostatic drive pump/transmission components from? Are they still in existance? And finally is there anything else that could be swapped out/modified and installed in the original...
  56. K

    Buying Advice  Looking to buy aMassey Ferguson 1010 as a second tractor

    Looking for some (from experience information) about the Massey Ferguson 1010 hydro 4wd tractors. I currently own a GC2410 and am very happy with it and looking to replace mid 80"s Wheel horse lawn trator. When I dig with the 2410 I have a 4X8 dump utility trailer that I can load and then move...
  57. C

    MF 1010 tiller

    I was wondering if the 1010 I am buying will handle a 48" tiller, anyone have exp. Also what is HP? (3 cyl desil)
  58. J

    Massey Ferguson 1010 value

    I am considering purchasing a used Massey Ferguson 1010 tractor. It has a manual transmission and is is good working order. Its primary function will be to scape an 800 ft driveway. Has about 1000 hours on it. Any information on it's suitability and value would be appreciated.
  59. F

    3 Point Hitch assembly for MF 1010 or Simplicity 9518 ?

    I just picked up 1991 MF 1010 and unfortunately it doesn't have the 3 hitch assembly. Only the two main arms connected to the hydraulics. I was thinking about having the parts fabricated for me... until I came across this diagram. Parts and Diagrams for Simplicity 2097353 - 9518, Compact...
  60. J

    1984 MF 1010 bleeding the fuel line

    I've just changed the fuel filter and now it won't start. I'm guessing I got air in the line. I've tried bleeding the line, but am having no luck. Am I missing something? I loosened the screws above the filter and cranked it, but no fuel comes out. The trap doesn't even completely fill. This is...
  61. M

    MF 1010 3cyl diesel

    Hi I am wondering what fair value of Compact Massey Ferguson tractor 1010 would be? It has 1000h on counter. Posted price is $5500. Any benchmark on this tractor is greatly appriciated? Mike
  62. ShelbyGT660

    Wanting to modifiy a Massey 1010 cab for my husq!

    Hi, I have the chance to purchase a Massey 1010 Cab for 100.00 even. Includes doors and glass. Now the massey 1010 is a little wider then the tractor I want to put this cab on, As it is also longer. I am seeking advice to weither its worth purchasing this cab and making it fit. Here are the...
  63. rascal810

    MF 1010 Head gasket

    Just thought I would let people know who are in need of a Massey Ferguson 1010 head gasket that I had one made up by cometic and it came out good. I spent a long time on the phone trying to track a OEM one down and had no luck. The package that they sent me had H3476043F on it as a part number...
  64. K

    Starting issue with Massey 1010

    Usually when cold, turn the glow plugs on for 20 seconds and it starts right up. Sometimes I have to hold the key to the start position for a few seconds before the starter engages... When the engine is warm it often takes several attempts before the starter engages. Sometimes hear the...
  65. K

    Front weights for a MF1010

    I'm in serious need of adding weight to the front of my SCUT 1010. The manual says you can add up to 150lbs of weight to the front. The factory weights are no longer available. Anyone know what other brand weights would work or better yet how I can fabricate some or adapt some other...
  66. J

    Massey Ferguson 1010 Alternator

    Hey everybody, I've got a question and I hope you can help. I recently purchased a Massey Ferguson 1010 4x4 used and the alternator has flown apart. I found another one at West KY Tractor Parts off another 1010 but it is larger than the one on it. I think it would fit if I had another...
  67. Gary Fowler

    MF 1010 parts

    A friend of mine has a MF 1010 that needs a new head on the engine. He says that the dealers in Baytown Tx. claim that they cant get parts for this tractor any more. Anyone know where one might be found
  68. H

    Turf tire sizes for MF1010

    I can't find this info in any of the manuals I own. Does anyone know where I can get it? Also, is there a way to cross over those sizes to an automotive type tire? Just wondering if a used auto tire with the same outside dia would be less $$$, but with more options in width?
  69. H

    Another MF1010 question

    I have the I&T shop manual (finally) and the MF parts manual, and have been reading on doing a clutch job. The pressure plate doesn't release very well, or at all sometimes. I've adjusted and will try so again, but I've done a lot of car clutches and this does not act like an adjustment issue...
  70. H

    Grapple on an MF1010?

    On occasion here, I have seen a need for a grapple, and would like to think someday I might add one, but am wondering a few things. First, I read a lot of guys here installing "remotes" and can only guess that means an extra quick connect either in the front or rear of the tractor. Second...
  71. H

    Small MF1010 issue today

    I figured it out thankfully, but thought I'd mention it anyway. Having some concrete work done here (paying someone cause I am horrible at concrete) and was getting ready to start the ole 1010 to bring in some dirt to fill in the forms a bit. Since I leave the key in, I turned it to the Gp's...
  72. H

    Installing a fuel guage on a MF1010?

    My MF1010 has an idiot light, instead of an actual guage, and of course within a month of owning it, I ran out of fuel. NOT something I want to repeat. The cap is right behind the steering wheel but it's still a pain to stop, unscrew it and try to see how much is left in there. Anyone ever...
  73. D

    Massey Ferguson 1010 three point?

    Hi,Im new to the forum although I have been reading here for some time while I was looking for a tractor. I just bought a Massey Ferguson 1010 from craigslist the thing runs great but as you can see from the listing it has a problem with the three point. I havent looked at it at all yet but I...
  74. D

    Snowblower  mf 1010 front mount

    Any one have a MF 1010 with a front mount snowblower on it. I'm looking for a blower that I can mount on the front. thanks
  75. R

    MF 1010 Hydraulic Problem

    Gear Drive MF1010, 2WD. My 3 pt is not raising properly. Typically someone has had the same problem and can direct me where to look. Control valve? Air in lines? Hydraulic pump? Heaven forbid its the hydraulic pump as they are no longer available. Can they be rebuilt? Where to start? I...
  76. H

    Got the right size tires on the MF1010

    Well I switched out the 6-12's for the 5-12's and I have to say, it does sound better. I hear the same sound (like gears straining) about 1/10 as much as before, so the drivetrain is most likely happier. I am not, however. I find that it seems a little quicker to want to tip in the front, and...
  77. H

    More MF1010 questions

    This looks like it's turning into a project tractor, not what I intended. At times there is quite a bit of blowby, other times, none. Should it come to that, how hard is a ring job on these little engines? Is there something I might be missing that would cause the blowby? I haven't done a...
  78. W

    MF1010 Paint Color

    I have a Massey Ferguson 1010 16HP tractor that is about 25 years old. It has much of it's life outside. It sits beside my 10 year old MF 1250. The color contrast is dramatic. The 1010 looks like it is an orange color sitting beside the red 1250. Is it a color shift due to sun exposure or was...
  79. T

    MF 1010 questions

    Looking at a MF1010 with 1300 hours. The tractor looks to be in good condition. I have heard it run, and it runs well, but I haven't actually driven it yet. The sheet metal is in very good condition, but paint is just a little weather-worn. I can definitely handle that though. I can get this...
  80. B

    Massey Ferguson 1010 and 1020 Parts

    I ran across this on Craigs List today. Thought there might be some interest:thumbsup:. MF 1010 and MF1020 Parts - $1 Date: 2010-03-07, 7:39PM EST Reply to: sale-yh5mk-1633350533@craigslist.org I am parting out a Massey Ferguson 1010 and a Massey Ferguson 1020 Tractor Both tractors were 3...
  81. dustin3207

    MF 1010

    has a snow blade and he wants $4500.good or bad deal? also looking for a compact tractor.
  82. W

    Is there a Hinomoto to match MF 1010

    I had this posted in the MF section before I saw this section. Hoping someone will be able to help with my problem. Thanks for your time. I need a main shaft assembly for the trans for a MF 1010. 4wd, gear drive tractor. MF no longer makes the part. I have tried many used part places and have...
  83. W

    Massey Ferguson 1010

    I need a main shaft assembly for the trans for a MF 1010. 4wd, gear drive tractor. MF no longer makes the part. I have tried many used part places and have been unsuccessful in finding it. I read on the internet that Hinomoto tractors parts would be interchangeable. They said they had ordered...
  84. K

    mf 1010 fuel pump

    I'm trying to start a MF 1010 which has been sitting for some time. There is fuel at the low pressure bleed screw before the pump, but on the high pressure side, if I loosen the lines at the injectors, only one line leaks fuel when the engine cranks, and that seems like just a dribble. There is...
  85. C

    Massey 1010 parts supplier

    Hi, Can anyone recommend a supplier for Massey 1010 parts that will ship to the uk or is uk based. I phoned up my local Massey dealer and the cost of parts is astronimical for example glow plugs are 」57ea ($94ea), air filter 」50 ($82.50) and these prices to not include VAT at 15%. I am sure...
  86. L

    Relay for the starter solenoid - MF1010

    Hey guys, my MF1010 has intermittent starting issues. Have checked all connections, replaced solenoid, battery, and ignition switch over the last several months. With a voltmeter, I see a drop of 2 volts in the ignition switch itself. 12.7 in, 10.8 volts out, no matter which terminal I check...
  87. J

    Massey Ferguson 1010 and 1020

    Not much response over on the other forum so I'll ask here. I am looking to get a compact tractor to maintain a few acres including mowing and food plots. The terrain is a little hilly but not too bad. A MF 1020 hydro in good condition and in my price range is for sale in the area. I have read...
  88. B

    MF 1010 w/ 1014 FEL

    I just purchased a 1010 with the 1014 FEL. The only manual I did not get was the one for the FEL. Does anyone have one that is in pdf? Thanks in advance.
  89. R

    Massey 1010

    Just took a quick look at a Massey Ferguson 1010 for a possible buy. I know very little about CUTs and next to nothing about this particular tractor. The owner is unsure of the year (probably early 90's). It's a series 2961, 16hp/3cyl diesel, live PTO, hydraulics, manual (gear driven)2WD, with...
  90. oneparsec

    MF 1010 FEL BUCKET DROP

    Help! I have a MF 1010 with a FEL and the bucket always wants to drop/dump, even with the engine rpm's at 2,000. Any suggestions or advise? I would certainly appreciate it. Thank you, Jeff :(
  91. C

    Massey 1010 attachment sizes

    Hi. My dad has a Massey 1010 he just bought...16HP..4WD..we would like to know what are the largest size attachments that will work with this model. I understand it's kinda small & don't wanna hurt anything on the tractor. He is looking to get a brush hog (rotary cutter), finish mower, back...
  92. G

    Help- MF1010 won't move

    MF 1010 4wd hydro, loader ,scoop, 330 hrs bought second hand. Tractor was sluggish reponding to the backward/forward control, seeming to get a little worse each time I moved it. Hydo oil was low so I added two quarts, cluch play was 1 1/2" and I adjusted to 3/4 inch. Linkage to control pedal...
  93. B

    MF1010 overheating

    My MF1010 overheats really easy when running the MMM. I have kept the radiator cleaned well and topped off, but it heats up real quick even when cutting fairly short/light grass to the point the temp light comes on and it starts spitting radiator fluid out. Probably takes less than 20 minutes...
  94. JJ. in B.C.

    MF 1010 which oils to use ??

    Hi Guys, can anyone tell me the correct oils to use in the engine and transmission of a 1986 MF1010, also which oil filter ?? Thanks, JJ.
  95. JJ. in B.C.

    MF1010 which oils to use ??

    Hi Guys, my first post on this forum. Internet friend of mine in Malta just purchased a 1986 MF1010 and needs to know the correct oils to use in engine and transmission. He would also like to get an owners manual, do AGCO dealers still have them ? Any help you can give will be much appreciated...
  96. B

    Massey 1010

    I'm looking at a used 87 Massey 1010 2WD, with a 54" belly mower & ROPS, and about 600 hours. The turf tires are pretty worn. Does anyone have any experience with this model they can share and his $3200 a fair price for one listed in VG condition (except the tires)?
  97. T

    Comparison  compare JD650, MF1010, kubota185

    i am interested in buying a small 4WD to cut grass, haul sap and firewood out of the woods. the jd 650, mf 1010, kubota 185, seem to be in my price range. but i've never actually seen them. any suggestions as to what might be the best for my purposes? i am in ontario. thanks.
  98. G

    Buying Advice  New Guy needs MF 1010 advice.

    I've got a chance to buy a Massey Ferguson 1010, series 2961 from my father in law. The negotiations have begun. He promises a " fair price", but he also made his fortune as a trial Attorney and has negotiated some big settlements. As a mere salesman, I know I face a formidable foe. I'm trying...
  99. gmsssi

    Massey Ferguson 1010 value?

    Anyone know what a Massey Ferguson 1010 subcompact with 54" mid-mount mower is worth? Standard transmission with 850 hours in good condition.
  100. M

    mf 1010 hydro

    I'm having trouble with my hydrostatic drive and may have to rebuild it. can someone whose done it before tell me if it was easy or would I be better off to take it to the dealer. I have the 1300 page service manual, but would like to get some input from others. any help would be appreciated.
  101. M

    mf 1010 help

    can anyone tell me the metric bolt size that fit on the engine block to mount the loader brackets for the 1010 loader. the service manual does not cover this item. any help would be appreciated.
  102. A

    Massey 1010 purchase

    Hello, Finally, the forum I've been looking for, I hope you folks can give me a little advice. My wife and I recently purchased a 5 acre lot to build a home and need a new tractor. I currently mow my yard (1/2 acre in town) with a 1968' Sears garden tractor. My father bought it new and I...
Top