kubota l4600

My fuel gauge died in the last month or so and I don't have time to sort out the classic "check the sending unit" recommendation in many other posts. Has anyone found a particular 3rd party fuel cap with gauge manufacturer which happens to be Kubota friendly (right width of cap for fuel...

Hi guys, I'm in the market and this model has caught my eye. Its a 2014 with HST. This is listed as an interim tier 4 model. I am wondering does it have a computer that will need a special scanner to work out what is wrong or will I be able to work on it myself? What does it have in regards...

I need a replacement tractor battery for my Kubota L4600. Where is the best place to get one. Can I buy at a Sam's club or Walmart? 12V, CCA: 582A us what I think I need according to specs. I got lucky the original battery lasted almost 10 years.

I have a 2014 kabota L4600 HST4WD and it just stop going forward and reverse everything else works and pulled the filter and oil is clean like new any help would be appreciated thanks saw another post from 2015 with same thing but didn’t see if the problem was any answers

Hopefully I'm missing something stupid. Ran a 2013 L4600 hydrostatic out of diesel. Figured since the tank had completely bottomed out, I should inspect the fuel bowl and clean it out. I turned off the fuel cock and took the bowl off. There was a little bit of filth in the bottom so I...

I had someone mess with my injectors and installed them wrong i need to know witch way the spill port on the barrel goes and the slotted gtove is on tje opposite side need to know wich degree it needs to be 4 cylinder?

L4600 grinding when trying to start after adjusting injector barells

Hydraulic Shift Kit for Caroni Flail Mower | Agri Supply 68318 Flail Mower, Rear Flail Mower TM19 | Caroni 3837 Today I own a Kubota L4600 which is ~45Hp to the PTO. I am looking to get a good quality flail that isn't excessively expensive and see a lot of favorable comments about the...

Hello all, So for the last 20 to 30 gallons of fuel seem to have problems with my l4600. Originally thought it was water related. Loss of power, black to grayish smoke, hesitation when throttling up. Drained tank, changed fuel filter and off we go. The exhaust smells almost like a kerosene...

I have a problem with my L4600. When the key is in the on position and then you depress the clutch, the starter engages. So after it is running and you once again press the clutch, the starter will engage again. If you think about it logically, the starter switch must be shorting to the start...

Let me stat by declaring I am not a Kabota mechanic but have built over 54 engines including 3 Porsche engines. My tractor would not start after stoping for gas. I had been moving out brush and trees to a burn pile. All I could hear was click. The elictrical coming on like a safety switch was...

For those who own a L4600, L3560 or L4060 with 27x8.50-15 Turf tires. Could you tell me what brand/model and ply rating the front tires are? Why I am asking? Thinking of replacing the front tires on my L3130 and it uses the same size turf tires as the models listed above. I called the local...

Ive seen them on some deeres and longs ... The right side adjustable arm has a crank on it, instead of the type with a jamb nut. Makes it much easier to level implements or angle them when not tools are required. Anyone know if they are available for a L series? I looked all the thru kubota...

Looking at an 2013 L4600 with: Quick Attach HD bucket, front and rear hydraulics, sun shade, and very low hours. Owner says it is an interim tier 4 machine. What does this mean? Anything that I should be concerned about-electronics that may fail, etc.?? Current value of this tractor? From...

New member here - Greetings everyone. I am in the market for a harley rake and am trying to figure out which would work best :the t6 or t8? I'm aware of the price difference, just not sure from an application/specs perspective how the kubota l4600 (2009) would handle either of them. I imagine...

Hey everyone, I have major probelm with my l4600 hst. It has popped itself out of low range about 3 times now, causig tractor to free roll in neutral. The lever engages but doesnt line up with L. It does line up with M, and H. When placing it in L you can still pull back on the lever but it...

For the last few weeks are so it would take 4/5 sec to move in reverse cold then be good the rest of the day. Then it got to were it would do it hot, Yesterday it wanted to creep before it full engaged in forward and Reverse. I backed it out of the shed today it went about 40 ft and quit pulling...

I have Kubota L4600 and am very happy with it. I was considering a 7' King Kutter tiller, does this tractor have enough HP.PTO HP is 36.7. I have sandy soill with a lot of vegetation Thanks In Advance. Bruce:drink:

Hi Guys I am looking at buying a Kubota L3800 or L4600. I previously owned a L3250 which I was very satisfied with so similar capacity would be OK. Anyone got any advice. Thanks Merniga Sydney Australia

Trying to decide which one to get? I have a several quotes from dealers. Comparing the quotes from various places, the L4600 HST is $1,155 cheaper than the L4701 HST, both with R4 tires and the quick attach 72" FEL. The only differences between the two models that I know of: 1) Tier level of...

I was looking at the 38hp range, in both Kubota (l3701) and Deere (3038E). After driving them both, I thought Kubota had Deere beat on this model. And I still do. I kept reading online, and everyone says think carefully about what you will do with the tractor now and in the future. Anticipate...

I have a inch for a Hoe for my L4600. I am looking at a ANSUNG MODEL : BK440 the price is $5200. A Bota Hoe is $8900,,, At $3700 difference the ANSUNG : BK440 looks inviting. I have never owned a Hoe are ran a Hoe I would like to dig stumps on my property. I would like opinions on these...

In my owners manual it says that at 150 hours I am supposed to clean the fuel filter assembly. It doesn't really go into detail so I have a few questions. 1. Would it be a good idea to just change the filter or is that a waste of $$? I fuel up with 5 gallon cans of relatively fresh fuel but...

The owners manual states that the draw bar has a 6k lb towing capacity. I can not find a spec for pulling capacity using the 3pt. only lift capacity, wondering how much I can safely load my dump trailer and move it around using a 2in receiver mounted on the 3pt

Hello, everyone. For a while, I have been trying to decide what tractor to get. Immediate need is to repair long gravel drive with a land plane and/or BB. Would also like to a small rotary cutter to trim beside road. Based on this, I started looking at BX and B tractors, which would be...

whats my problem? i of course have lever all the way down. 389075

Brought a new L4600 HST in April :)... I have not had much free time to use it other than a little loader work and mostly pallet fork work... Its mostly a toy I have other tractors that do the hard field around here... I am self employed and a one man show I needed a good dedicated loader...

Have a new L4600 HST MFWD with FEL. The book says 3pt capacity is about 2800 Max but nearer 2200lbs 2 ft behind lift point (however that is measured). The woods seeder has shipping weight about 1750+/- for the 6 ft model with discs on front, spike rollers, 2seed boxes, and cast iron...

Is it possible to hook up a front mount snow blower on a L4600 via hydraulic power from 3 point..or some other way ? :confused2:

Does any one know if it is possible to mount a front snow blower on a L4600 ? Seems like there would have to be a way....:mad:

The Build My Kubota site lists pallet forks as an option. Are the Kubota forks the best option or are there better options to consider? (1) PALLET FORK FRAME TWO-LEVER QUICK ATTACH TYPE L2238-PALLET FORK FRAME TWO-LEVER QUICK ATTACH TYPE $677.00 (1) 36" PALLET FORKS (1000 LBS. CAPACITY)...

These two options are listed for the L4600: (1) DRAFT CONTROL KIT L8311C-DRAFT CONTROL KIT $462.00 (1) TOP-N-TILT KIT L8388-TOP-N-TILT KIT $871.00 I understand the Top-N-Tilt kit is the hydraulic third arm for the 3 pt. hitch and would be useful for a box scraper. I'm not sure what the Draft...

In my first post regarding my research into buying a L4600, others have recommended getting as many remote hydraulics from the get go as possible. From the Build my Kubota site, 2 Rear Remote options prices out at $1302 and looks like this: (1) 1ST LEVER AND BASE KIT FOR L4600 L8560-1ST LEVER...

Hello, I'm looking to make my first tractor purchase later next month and am beginning to get quotes from local dealers. Some background: Location: NW Illinois in Mississippi bottom ground near Quad Cities, Silver maple and reed canary grass primarily(can be wet) Acreage: 66 acres I own and...

Hi I am about to purchase new L4600, I was able to drive a hydro around and i find the brake pedal and single forward/reverse pedal to be a little awkward. (not enough to not make the purchase however) I mainly will be using the tractor for loader work and i know this is where the Hydro shines...

I recently bought a new2013 l4600 with a la764 loader and a few attachments. I need to find a trailer for it. I have my eye on a 18' deckover trailer with 2 5200lb axles with 8' slide in ramps. But I need to know if a deckover will be to high to safely load my tractor. I can order the same...

Can anyone tell me if there is a Torque Spec for tightening the castle nut where the tie rod attaches to the steering knuckle?

I hear that this is like the Apple Genius Bar for tractors. So geniuses what do you think? A newbee and i am getting a TLB. I have looked and now focused on these three with HST and the recommended matching loaders and backhoes plus mechanical thumbs. My novice observations are that there...

I'm looking to purchase a new tractor loader backhoe and have been looking at the L4600 with a subframe backhoe attachment. Then, I was told that the L39 would be a better performing backhoe than the L4600. I was told that the L39 is a whole different machine and that everything about it is...

All 4x4, all with FEL, and all HST. I have a rough quote of $25k for the L4600 and haven't checked on the MX's yet. Website build price is within $300 for the L4600 and MX5100 and the MX4700 is cheapest. For my use, the extra HP isn't a requirement; in fact I could probably get away with the...

Well I should take delivery this week of a new L4600 with the BH92 Backhoe. I also purchased the shop manual already and have begun reading. I was wondering if I could impose on you if ypu could tell me how your machines are doing? Thank you for your help

Going to purchase a new Kubota L4600 with loader before year end and wondering whether coupling the attachments leads to better pricing. In order of importance I want a snow blade (probably rear), rotary mower, box blade and post hole auger. On the wish list is a grapple bucket that will work...

Im looking for some guidance here. Im about to buy a L4600 with the Bh92 hoe with loaded tires and I was wondering how rough it would that be on my lawn? I wouldnt do it everyday and would wait for dry conditions. I would use the tractor in the woods also and i wasnt sure about the Turf Tire...

MY uncle is looking at buying one of these beauties brand new. Dealers are right next to each other (Union, Maine) and have decent reps. cost is about the same too. Kubota is 46 horse vs the JD 42 but other than that the lifting specs, weight, features are about dead even. He is leaning to...

I'm looking into purchasing a new 3720 because of the 0% financing they have right now but wow is the price high. 3720 compact tractor $26,892.79 300CX Loader $4,890.40 485 Backhoe $9,418.11 Frontier GM2072R Finish Mower $3,737.33 Grand Total $44,938.63 plus tax The question is, If this is a...

Have narrowed down my choice of new Kabota's to either a L4600 or the MX4700. Was considering the the Grand L 4060 but realized that I need just a working tractor and can live without all the bells and whistles that come with the Grand ( tilt wheel, digital readout instrument panel, etc.) Better...

Had the 50 hour service done on 8/21 on my L4600. Had all filters and fluids changed out. I paid particular attention to the filter with the magnetic ring. It was very clean and gave me no cause for concern. My place is 51 miles from the dealer in Lewiston , Idaho. Had them come out because my...

I'm trading in my B2620 mmm and fel with 560 hours, dealer say I can chose from the MX4700 or L4600 for $28k. Both options would come with FEL and backhoe. The dealer broke it down as $14.5k for my B2620 in credit on my new tractor. Something seems off to me in the deal. I was expecting to...

We own about 35 acres here in VT and the wife has a LONG list of work to be done, once we choose the proper sized tractor with a backhoe. I have some close-in work to be done around the house such as removing old porch posts to set new ones deeper, excavate along the foundation on one side to...

Got 40 hours now on my L4600HST and no problems so far.... Only thing I have done is I switched my rear tires positioning. They came in the narrowest setting from the dealer. Leaving the centers with the dish out as they came, and taking the right side tire/rim and moving it to left, and left...

I've got about 40 acres of wooded acreage that is loaded with bush honeysuckle. I mean thick. I want to get in there and take the woods back so my young kids can enjoy it. I'm trying to decide between the L3800 and L4600. I can get the 4600 for about 4000 more. The larger loader capacity...

Been looking at some tractors and it looks like I am going with a Kubota L4600 with a L764 loader. Going Tuesday to pick it up!

Does anybody know if they are going to discontinue the L4600. And if so would it still a good idea to buy a new one ?

Well since everyone likes to see the same tractors that are on the lot, off the lot here it is! I had my dad come over to the farm (well we are trying to clean up and restart a farm that the previous owners let go") and I put about 5 hours on the new one, and he put about 8 on the BX (He...

Hello everyone, just signed up as I have been reading a lot on here lately. We just bought a Kubota L4600 with FEL and are expecting it to be delivered by the end of this week. My question is: I would like to add the factory 3 remote valves to the rear of the tractor. Dealer quoted me $1500...

OK, so i wanted a mx5100 but in australia that means no backhoe (per my other post) So i have 2 options - a L4240 or a L4600 the main diferences are the l4240 has some nice things like a better seat, dash board, hst+, auto throttle control, bigger front axle, can take the bigger FeL LA854...

Hello! New member here looking for some help and advice on my first tractor purchase. I have been doing some research and looking for a month or so. I am not completely sold on the Kubota L3800 or L4600 but I am leaning hard toward one or the other. We have a local dealer that I really like...

I can get a new L 4400 for 22000 or a new L 4600 for 24000. Anyone have the pros and cons and which might be the better deal? Thanks

Can anyone shoot a few pics of their rear remote valving and where the plumbing attatches too ?

new L4600HST, Ag tires, 764 loader with QA bucket.......... $23,800 Go, or no go ?

I have an L4200 heater won't heat,I've replaced the thermostat,didn't help...

Couple of questions ... i looked at the L4600 brochure and it shows a (min tread) ? width of 62.4 ..... it does not say if this is with the industrial tires, or ag... can someone who has one with Ag tires adjusted out to their widest setting tell me what the width is ? Also, one dealer...

I recently purchased a new tractor. Kubota L4600 HST 4WD w/FEL equipped with quick attach heavy duty woods bucket. Aluminum canopy.. front top lights and a rear work light. Fluid filled rear tires and a front remote valve system for a hydraulic front blade. Other attachments include an...

Anyone know about the Kubota L4600 being assembled in Thailand?

First post and i have a problem. Have a L4600 HST. I bought it new and have about 20 hours on the meter so i could probably use my warranty but i thought it might be a simple fix that i am not seeing. This just started today. The throttle lever will not stay where i set it if i move it over...

Got my L4600 in the barn now till the ground drys up towards spring. I was wondering though.....when did the L4600 first come out on the market? Best M

Hello TractorByNet! I'm in the process of buying my first tractor. It'll be used for landscaping, snow removal, brush hogging, maintaining a pond, maintaining a 2000+ foot gravel driveway, some logging, etc. on my new 68 acre property. I will admit I'm **totally** new to tractors. I've...

New guy here looking for some new tractor buying opionions. I am not new to tractors but I am ready to purchase a new one. It has gotten old having to work on the tractor 2 hours to do 3 hours worth of work. I was hoping to get some info on these tractors but let me start over. My father has...

Tying to work through all the pros and cons for each of these machines and which one would make the most sense for my needs. Primary use will be cutting 20 acres of fairly hilly pasture land, not too steep though and secondary usage would include general maintenance of gravel roadway, fence...

Our Non-Profit horse park is in the market for a new tractor. Used for mowing, grooming arenas, snow removal occasionally. I have pricing on these tractors but do not know enough to make an informed decision. Any feedback is welcome.

I REALLY need some help. I am completely confused as to what size tractor to buy. I am looking at the l3800 and l4600, but can't decide. I have 17 acres with 2 acre pond. I will be mowing 7 acres, tilling 1 acre and doing miscellaneous "man" things with my tractor. I want a tractor that can...

Trying to pick from the Kubota L4600 or the Mahindra 4035 (both 4x4 with FEL). I want to use 6 foot implements, bush hog, maintain a gravel road, spread dirt and keep up about 300 acres of hunting property. The L4600 has a bigger engine (46 HP) but the 4035 has stronger FEL and is heavier...

i am trying out a brand new L4600 HTS kubota tractor it seems to be a nice tractor except THE HYDROSTATIC is prettty darn loud and another thing is that it has no tilt steering , witch is a minus . i am wondering if anybody has one, and how is it? (the hydrostatic transmission ) i have no need...

Hey gang, I'm looking for some info comparing the L4600 vs the MX4700 as far as operator options. Both layouts look to be about the same just looks like the sheet metal is different? both spec'd out to R4's, loader, 4x4, 2 remotes. I couldnt find a operators station view on kubota.com...

I am thinking about purchasing a new Kubota. I bought a L3800 with FL and BH last year which works really well, but I need something with a stronger BH and FL without breaking the bank. I originally thought about the Grand L, but the dealer recommended going with either the L4600, then after...

Delivered today...love it.

I'm looking at a simple, bare bones 2wd utility tractor to hook a mid mount post pounder to and to ted and rake hay. I know the L4600 is replacing the L4400 but I'm curious what the big difference is between the two and if its worth paying more for the newer 4600. Also, what is the main...

This new thread is a bit of a continuation of a discussion started on LD1's "New L4600...anyone look at one yet????" http://www.tractorbynet.com/forums/kubota-buying-pricing/232819-new-l4600-anyone-look-one.html. LD1 had some interesting information regarding the FEL capability on the L4600...

I thought I'd start a new thread which includes some pics of the new L4600 with the LA764 Loader. My dealer has one on his lot and I thought I'd share some pics. It's a real nice looking tractor, enjoy the pics. Stu

I just seen the new L4600 listed on kubotas site:thumbsup: Anyone look at one yet? It pretty much looks like all of the specs/weights/capacities are the same. Just looks like a styling update like the 3200/3800. Anyone one fore sure (dealers??) know if anything else changed. I am not looking...