kubota bx2370

This is my first time owning and maintaining a tractor. It started leaking from the the hydraulic fluid drain port. Does the sealing shim need to be changed with each UTD fluid replacement? I saw no such requirement listed in the manual. What els could cause the leak? I did not leave it...

The smaller BXs just don't have the weight / hydraulic down force in any 3-point hitch mounted implement I know of to dig out rocks / stumps / buried pipe / etc. My property is very rocky and box blade tines do very little (I didn't spend the money for a BX backhoe version for this reason -...

Don't know what else to call it. We are dumping our non-burnable plant compost from the garden / yard down a small hill in the back every year. This amounts to a land fill (yes we have other compost - this is getting rid of the excess). The problem is this piles up and pushing the latest...

Both subcompact, JD is a bit heavier and more hp. Both less than 300 hrs. Any benefit to one over another? Or mostly brand loyalty? Thank you.

Hello all! New to me BX2370. No issues when I first got it. First thing I did was change all filters and fluids. Issue I am having now is that when it sits a day or two, I start it, it runs a few minutes and dies. I can restart it after either bleeding the fuel screw on the injector pump or...

Need some mower deck help with my BX2370. Just acquired it from the original owners family. It had sat a while. It has a 60” Drive over deck. The deck height knob was frozen and I was able to clean it/grease it and free it up. I mowed for the first time today and noticed that any time I hit a...

Hello! I am looking to pick up a used BX2370 locally. It was well maintained, low hour. It has say for a while. Runs, drives perfect. I will do a full service on it ASAP. Only flaw I found was that the FEL would not lift the front tires off the ground. They would lift slightly. I am used to...

Hello All. I have a 2016 BX2370 that is mainly used as a lawnmower, but occasionally I attach our 4 foot brush hog to it and use it on steep areas. I have turf tires on the tractor when lawn mowing, but I would like to get a set of tires and wheels to put on when not mowing the flat yard. Where...

The first shot at this is a Landscape Rake: LandPride or ETS run $600 - $800 even for the 48" width I will be limited to. I am willing to spend the money but wonder if that is the best approach or overkill. There are two jobs: one is raking then moving to a burn / mulch pile the other is...

Yesterday my BX would not start - made clicking noises. Plugged jumper cable into my winch power connector (https://www.tractorbynet.com/forums/owning-operating/425790-adding-electrical-devices-tractor.html?highlight=) and tried to jumpstart, no luck. Removed battery - charger showed 95%...

It can be done!! With the forks on the bucket I can get under the bale and tilt back slightly, the forks then act like a sled across the paddocks, 4WD is a must as the back wheels come up sometimes but overall low and slow gets us there without incident, apart from being harassed by hungry horses.

I sold my brother who lives next door my 50 hour BX2370-1 and bought a used 99 hours Z724X from Barlows. I was testing the Z on some steep hillsides behind and beside my brothers house and was crossing a steep hill when my Z rear wheels got in a water run off gully/10" ditch that was wet. Got...

Can someone tell me what the recommended idle speed is for the BX 2370? Thanks, Barney

Replaced the trans filter at 50 hours, as specified in the owner's manual. What a PIA to remove this filter. I used a pair of wide opening channel lock pliers to remove the old filter. Buggered it up pretty badly, but since it's a throwaway, not a problem. I was unable to get any of my...

Howdy. I'm new here and would appreciate some opinions. I'm looking at a BX2370, brand new from a dealer and taking advantage of the 0% financing they're offering. Includes 2 year bumper to bumper and 6 year drive train warranty. The tractor will include a loader and a 54" mowing deck. Price...

I'm looking to possibly purchase a 2013 Kubota BX2370 that has 225 hours on it, Mid and Rear PTO, 60" mower, and a 60" rear blade. I'm hoping to use this to mow the lawn (the primary use) and use the blade to remove snow, and maybe a small amount of dirt. It does not have a FEL. I live in a...

I have an issue with the mower deck dropping to a lower setting while mowing... Dealer changed the mower link cam...now its worse than before... Stopped at dealer today they said I need to regulate the valve beside the deck adjustment?? Never had to do this on 2 previous BX tractors... Any...

Hi all, I own a 2014 BX2370 with 60" deck, FEL, and rear blade with approximately 200 hours. I'm going to be moving and will unfortunately no longer need it and was looking to sell it. Never sold a tractor before, so first question is should I talk to the dealer I bought it from and see what...

Hello. Looking to see if anyone has added remote or extra battery cables or attachment points on a BX2370 (or similar model). I am running one of the "Countyline" 30 gallon sprayers strapped to a carry-all for spraying my fence line. The sprayer works off of a connection to a tractor/car...

Steve Barlow delivered the new BX2370-1 a couple days ago. My wife and Grandson used it first :D which is why I bought it. Some help with mowing!:cool2: She told me later that it sure rode rough. I did an hour on it and came in and ordered the spring assist seat from the company in Indiana so...

Toying with the idea of purchasing a 3pt Boom Pole for my Kubota BX2370. The spec sheet says 680lbs lift capacity at 24" behind pin. That probably means I need at least a 1000lb capacity Boom Pole. Any specific recommendations? --

After 5 months of it sitting in the garage, I FINALLY got around to installing it today. Don't know why I kept putting it off. Took about 5 minutes. I used a Dewalt Industrial Cobalt bit to start, then a Dewalt Step Drill Bit to widen the hole. I'd never used a step drill bit before. Wow...

I have a Honda HRX217HYA and walk-behind trimmer. I'm on less than an acre. The Honda and Husqvarna are working out well for me. There is a ~17.5 acre undeveloped open-space behind me. Grass, small trash trees. The corporate owners have had it mowed in the past, but it nothing has been...

I've just listed my L2900 GST for sale on C/L and want a newer, smaller Kubota. I found 2 candidates. Thoughts and advice... The B2910 is a 2009 has 809 hours, loader and a 60" belly mower. The BX2370 is a 2013 has 167 hours, loader, QA bucket, QA forks, and 54" belly mower. I converted...

Any suggestions on a good 3pt to 2" receiver adapter that's compatible with the Land Pride QH05? I see a bunch on Amazon, but I'm never sure what will actually fit the QH05. --

Worked like a charm!

Any idea what these weigh and / or how much they should typically cost? --

Today while working on my bx2370 I wiggled the 4x4 shaft and was shocked when the shaft pulled right out of the splined hub...is this normal? I looked closer and see that there is a hole that goes thru the shaft and the splined hub that the shaft goes into. Is there a missing cotter pin, bolt...

Made some progress with it yesterday. In general, should the LPGS "float" (holding 3pt lever down), or should it be held at a fixed height?

Took delivery yesterday, finally! When I put the lever to 4WD, it won't stay and will pop out back into 2WD. I really think it's an adjustment that needs to be made since it will stay in gear until a load is put on the front wheels. I only have 5.8 hours on the tractor and it had .4 when I...

I've got 3x small properties. House on a 70' wide x 105' deep lot. Then two houses on a 123' wide by 180' deep lot. All 3 back up to an unmaintained ~8 acres of open space. People walk their dogs back there, jogging trail, ride ATV's, dump trash, utilities access, etc. The landowner put up...

BX2370 B2320 BX2680 B2601 B2650 Loader LA243A LA304 LA344 LA434 LA534A 500mm max height 518 545 659 827 pivot pin, max height 745 772 948 1146 I bought the BX2370 predominantly to build / rebuild a bunch of privacy fence. Thinking post-hole digger and a powered...

I've been thinking something this Swisher Trail Mule would be handy for hauling a tool-box, etc, behind my BX2370. Would probably attach it to the 3pt hitch.

I have a few stumps and Lilac bushes to remove. Was think I might try a spade attachment on the bucket. Any suggestions?

I have the BXpanded Quick on Pallet / Brush Forks, and I like them a lot. That said -- I think I'm losing quite a bit of my already limited capacity having them so far out front. Any suggestions on a set of 3pt hitch pallet forks? Or maybe even quick-attach forks I could use in place of the...

Bought it with the LA243A FEL and Land Pride PD10 post-hole digger. I've since added the BXPANDED Piranha tooth bar, ROPS mounted tool box, quick-on pallet forks, and quick-on bucket hooks. The backyard is little too flat and even negative grade in some areas. I want to create a slope away...

2016 Kubota BX2370-1. Coming up on about 13hrs. Got a flat (rear) tire. I'm planning on having the dealer install Rimguard and adding weights to the rear wheels sooner than later. Also thinking about purchasing a Land Pride BB1248 48" rear box blade from the same dealer at the same time. --...

Looking at having Rimguard installed -- 83lbs per rear wheel. About $1/lb. Wheel weights, 51lbs per rear wheel. About $.85/lb. Strongly toying with the idea of adding the Land Pride BB1248 box blade as well. Sound about right? I don't know if it's really an alternative to a box blade, but...

We recently had a massive wind storm. Gusts over 100mph. I've got houses on 3 lots. 11340, 10800, 7382 square feet -- so about 2/3 of an acre total. The storm took out about 600 feet of privacy fence and a couple trees. A few more trees need to go. All 3 properties are in need of complete...

Hi to all: I have two Kubotas, a BX2230 and BX2370 and they are in two separate locations about 100 miles from each other. I have a problem with the starter of the BX2230 and my question is: can I use safely the starter of the BX2370 in the BX2230, while I fix the starter of the BX2230? Thanks...

Hey everyone, has anyone purchased any of these two tractors within the last few months in Ontario or the rest of Canada? Specifically I am looking for a 60" MMM, Front end loader and front mount snowblower. I've been to both dealers and gotten quotes and am amazed and how much more the John...

Hello all, I am taking delivery of a BX2370 very soon. It is going to be a multi-purpose machine. I have about 2 acres of mostly flat prairie land in eastern Colorado. I am getting the FEL and the MMM. I am debating getting a three-point mounted sprayer to use as my ballast when using the...

I am looking to purchase or would prefer to exchange the ROPS from my BX2370 with either an older shorter non-folding ROPS or the newer narrow folding ROPS from the BXxx70 series. Can anyone help me out? Maybe someone that is looking for the wider taller style ROPS that's adding a BH or maybe...

I had my new BX2370 delivered Thursday, and have been unable to use it until today (Saturday) due to work. Unfortunately, the owners manual did not come with it, and the place I purchased the tractor from mailed it to me Friday...I was hoping to get it today but did not. Anyhow, I have a FEL and...

Looking for some advice here. I have a Kubota BX2370 tractor and am shopping around for a tiller attachment. My owners manual says the max tiller size it can handle is 42"/375 lbs. max. Has anyone ever ran a bigger tiller than this? I was looking at using a Woods TSR-44 tiller 44"/440 lbs. Not...

I sat out last fall to find a new tractor to replace our aging Yanmar F16D. I had a pretty good idea of what I was after, so I narrowed my choices to my three closest dealers - John Deere, Kubota and Kioti. I was interested in a Yanmar, but the local dealer had no inventory and wasn't...

Just wondering if any one has added a backhoe to a BX2370. If so how do you like it?

Was helping a neighbor move some large oak rounds and one rolled back onto the hood. It was a big wake up call as I didn't get hurt and it scared some sense into me. The log dented the hood pretty good and the rolled onto the left floorboard, denting the edge of it too. Have you all filed a...

I have owned my BX2360 for about 4 years and I went by the dealership last week and looked at the BX2370's. I really like the way BX2370 seat is and the way the steering wheel seems to have been "repositioned" in that I don't feel like I am bending over to operate the 2370 like I do with the...

Hi all, I'm back (long story short I bought a Branson 2400H last year and sold it due to us deciding we weren't going to build our house last year. Now we have built our house so I'm back in the market for a compact tractor) and am looking for some suggestions. I currently have a 2014 Ferris...

Hi all, I had a request from Code54 so I thought I would post this here for all to see and hopefully find. My dealer installed all of this for me at time of purchase on my BX2370-1. I have the quick hitch with loader and plow for the quick hitch, the other plow is different and hooks up...

I'm looking for service and maintanance tips

I have a kubota BX2370 with R4 tires and I was wondering how much each tire would weigh if it was filled with liquid ballast? Will they help with the lifting capacity of the FEL?

Hey guys, I bought my Bx2370-1 last year and I just did the 50 hour service. I JUST LOVE THIS MACHINE. Well I always planned on adding a loader but it looks like my financials are going the way I want them too this coming year and I always wanted a backhoe for some odds and end stuff and to...

Hi, I currently have a craftsman 1986 20 HP OAN engine, with dozer blade, dual 50 LB wheel weights, tire chains, and ~75 LB weight on back, besides my 200 LB arse. It has served me well thru the years but for the past 12 years in my new house it just can not keep up with snow, I am tired of...

It seems there is confusion about the differences between Kubota's BX 70 series prodcts and the 70-1 series. I was in a dealership last week and their answer was it was just showing last year's model versus the new model. They said everything else is the same. But that isn't correct after i...

Hi Everyone Just wanted to start by saying how useful this sight was in deciding which scut to buy . So a brief report on on my new mount and what I think of it . So far it rocks, I love it and its going to get the *** worked off it over the next year or so because I am...

i know i know, snug it up. I learned the hard way one time that its best to use a torque wrench on oil/differential bolts. Its time for my 50 hr service and would like to know if anyone knows the oil pan drain plug torque value and the hydrostatic drain plug torque value as well. Me and the...

We have had a ton of snow this year and ice to boot so im thinking it might be time to add a front loader to my bx in addition to my rear blade that gets most of the snow duty. I wanted the loader when i bought new last year but couldnt justify the extra 3000 at the time. My dealer said he...

Greetings All- Very informative and courteous bunch of forums. This is my first post. I've been lurking and reading quite awhile now. I live with my family in North San Juan, CA, close to Grass Valley in Nevada County on ~3 acres. I'm going to bite the bullet and get a new BX2370 shortly...

I tried to search, but could not find anything. Last night while moving snow I experienced a issue with my BX2370 (approximately 110 hours), which I have not experienced before. Intermittently I would have loss of power under load (IE going forward, reverse, operating the loader, or 3 point)...

I tried to search, but could not find anything. Last night while moving snow I experienced a issue with my BX2370 (approximately 110 hours), which I have not experienced before. Intermittently I would have loss of power under load (IE going forward, reverse, operating the loader, or 3 point)...

How much are bolt on wheel weights for a kubota BX2370 near St. Albans Vermont? I went on the Kubota website and they say that they are around $60.

Getting a new BX2370-1 delivered Friday. Looking at the Rip and Dig but all of the reviews I have read were for larger machines.... Anyone have first hand experience with one on a BX2370 or SMALLER tractor? Looking to dig some trenches for electrical lines (18-20 inches deep) and plant some...

I have a conundrum. My friend says get a auto bezel from a junk yard and use that. I think I want something more sealed. Under the seat would make a good light for the floor of the operator area. Anyone done this before?

A friend is looking at these two models,both with MMM and front snow blower and FEL.He told me he was quoted $2,000 more for the Kubota.I am a Kubota guy I quess having owned three of them but all a lot larger than either of these sub-compacts. Both dealers are very good,I have dealt with...

I got to the 10 hour mark and set out to grease all of the fittings. I have the FEL. But I kept finding a few here or there and it made me wonder. Is there a diagram of the location for ALL of the zerk fittings? Help a busy fella out. Dan

Yesterday me and my father went to our local dealer and we measured our model tractor with an FEL and 3 point hitch. With the FEL bucket flat on the ground and the 3 point hitch lowered all the way down, it measures out at about 11'. We have a 10' trailer and we are gonna back the tractor up...

I have a kubota bx 2370 and I have a mid mount mower with it and I'm gonna be getting the LA243 FEL for it. I have a 250lb rear blade for it. I am wondering about how much or if I am gonna need anymore weight off of the back end of the tractor for ballast. Any suggestions?

Maybe I never noticed it before, maybe I lowered my MMM in the past but I realized yesterday(and replicated it last night) that my MMM lowers or leaks down overnight. I think its normal from my reading but most post are about loaders and backhoes which are much heavier implements. I don't see...

I was checking fluids on my new kubota bx that i got this year. When i got her the overflow for the radiator was at the very bottom line of acceptable so i didn't pay it much attention but when i just checked again last night at 40hrs the overflow is below the L line and i cant even see any...

I've been looking at the 1025R and the BX2370 I could live with either. I've gotten quotes on both with a 60" deck and loader, I added the quick connect to the BX FEL. The out the door price for the 1025R is $16400 and the BX2370 is $15000 out the door. My question is, can I get a better deal...

A while back I sold my JD 5210 because I was barely using it. My thoughts were to invest in a good zero turn for mowing. After shopping around and driving several of them I had some doubts about how I'd like them, and a good one is quite an investment for a single purpose machine. So I took off...

I got the 60"MMM, bagger, and the FEL....Im looking forward to tomorrow. I can finally get the place in real shape.

I have a 6 acre place in Southeast Ohio. It's a very hilly place. I am considering buying a 2014 BX2370 with a 60" belly mower and a 48" brush cutter. I have a couple of questions. How do these machines do on hills? My field has some places where the grade might be 25% or more. Should I...

Our new BX2370-1 was delivered Thursday and we have about 6 hrs on it between my wife and I since Friday Eve. We have both found the ride to be extremely rough - jarring. The rear turf tires have rim guard in them and I have decreased the pressure to about 10 lbs each. I also put some...

I feel like John Thomas. :laughing: I've had my L3800 for 2.5 years now and have done most of the major stuff that I've wanted to do. It only has 160 hrs on it. I put 50 hrs on it in the first 6 months, then 100 hours in the next two years. I'll be using it for some box blade work this...

Thinking once again about consolidating and upgrading. I have received two quotes for a BX2370-1 with: -loader w/bucket & quick tach pallet fork -60" mid-mount mower -60" hydraulic front blade (frame mount, NOT loader-mounted) I would be trading '99 JD 425 w/ 54" mower, power flow bagger, 54"...

I have a new bx2370 with 23hrs on it and noticed i have bubbles visible in my HST fluid when i pull the dipstick after working with the tractor. They pop/dissipate or whatever you wanna call it after a short time and the fluid looks clear and normal color. Fluid level checks out good since...

Is there some easy way to turn the cutting height adjustment on the BX23??? It seems very balky and sometimes impossible to turn. I know that the lift must be in the highest position to adjust it. When I get it in the TOP position, it often doesn't want to move from there? Any help would be...

Just mowed this afternoon for the first time on my new BX2370!!! When very smoothly compared to what I had been using. I was impressed by the short turning radius too. Like driving a new Lexus!!

FINALLY!! After waiting more than a month to get a new Bx2370-1 in stock with the new floor mat and narrow full folding ROPS it finally was delivered today. Played around in the yard a little, took the boy on a ride down to his grandmothers, and mostly just played with all the levers and...

Just bought a BX2370. The idle is at 1500rpm. The book says normal is 1350-1550. Had anyone lowered their idle or can give me a way to lower it. Thanks in advance.

... in particular the "specially reinforced fame" ... what exactly is beefed up? What are the differences in the loaders? .... I might have missed something but the specs looked the same. I sat on BX2370 (didn't drive it), liked what I saw but have concerns about the pedal setup. I have hip and...

Well gang im awaiting the delivery of my new BX2370 this week or next. I was laying here making a list of things I needed (skid plate, bumper, future attachments etc) and I started to wonder if there was anything my BX cant do or that I shouldn't do with my new tractor? Growing up we used a...

Sold My Old Wheel Horse. Looking At Bx2370 Or Jd1025r.Leaning Toward Kubota. $2000 Difference InFavor OF Kubota. Dont Like The PlastiC OfJd. Any Thoughts

I realize it depends on what you're doing at what RPM I suppose, but I just hit about 3.2 hours tonight and the fuel gauge still shows full. On average, how many hours can I expect per tankful? Thanks. BTW, man I love this thing! I did my annual tree trimming today. Hauled the cut offs to the...

Anybody know the difference - both 2013 models ?

Looking to buy a scut. Tossing around the idea of a BX1870 with 54 deck or BX2370 with 60 deck. Not really plan on getting the FEL. Main use would be for mowing, pulling a trailer (firewood etc) and snow removal. I have a 200 ft blacktop driveway and about 3 acres to mow. 3pt hitch would be used...

I am a new owner of BX2370 with front loader, box blade and 60" mower (3blades). I struggled with the mower removal because the shaft was so hard to work with and I couldn't pull it out. Any advice from you all who went through the same thing and if any remedy? I am hoping to work with boxblade...

How much?

I purchased a BX2370 by phone; traded in a GR2100. I thought it would include the hydronic valves for a future Frontenac Loader - it didn't. So about how much will it costs to add the valves and loader?9

There's about $5500 difference in similarly spec'd machines. Am I gaining anything else beyond the backhoe?

Hi folks, my first post. Here's a few pics of my DIY fold-able front grill protector. About $30 total cost and 2 evenings in the man cave. Cheers from NB Canada

Hey Guys, We just purchased a 1 acre waterfront lot in PEI to build our retirement home. The lot has a very gentle slope which runs down to the water - it's not even noticeable. The average annual snowfall is 11 feet, it's usually heavy, and it sticks around for a long time. I'll be using the...

Sorry - posted in the wrong area.

after researching and looking...I decided to go with the BX2370 & 60" mower(not fine cut)...no loader or anything(I have a Bobcat)...will only be used to mow 3 - 4 acres... my other tractor/mower is a 1988 Ford 1220...bought new...never had a problem until this year...replaced water pump, and...

i am not much of a typeist or speller.

For years I have had a 1991 Kubota B20TLB and a 2000 Great Dane zero turn mower. My zero turn needs an engine rebuild, so I have decided to sell both the mower and B-20 and buy a machine that can both cut and have a loader (i don't need the backhoe). The tractor will be mainly used for weekly...

I have been looking for a 48" bush hog for my BX2370. The salesman told me it would handle a 48" with no problem. Looking at the manual it states the max width of a rear mount mower as 60", but a max weight of 309. This makes no sense to me since most 48" cutters I have looked at are between...

Hello. New to this and trying to get the hang of it, so here goes. I am looking at buying a subcompact tractor and have narrowed it down to the kioti cs2410 and the Kubota bx2370 (i think). I am looking for feedback for the better of the two and could /would really appreciate it. Will be using a...