john deere 5520

I purchased a 5520, the instrument cluster is not working. I sent it to be tested and it works fine. I've had a mechanic work on it extensively with no success. The cluster has rpm, fuel gauge and temperature gauge. I'm considering just adding aftermarket fuel and temperature gauges. I'd love...

Need to replace the seals. Stupid question: do I need to jack up the tractor? I need to remove both tie rods.

For the last few years had a noise coming from rear of JD 5520 when releasing clutch (clutch pedal up.) It is a groaning noise that stops once the tractor comes up to speed. Any gear, doesn't happen in neutral. No noise when clutch is depressed. Clutch works fine, but tends to engage quickly and...

Hi, just purchased a John Deere 5520 power reverser. Changed the oil and filter. I put in the 2.2 gallons of oil the specs called for but it’s not even hitting the tip of the dipstick. The 2.2 gallons is supposed to include the filter change. Any suggestions?

I have a 2003 John Deere 5520 cab tractor with less than 500 hours that I use a bucket and also forks on, but mostly forks. The tractor has recently developed an issue that is especially aggravating when using forks but occurs regardless of what implement is on the front. When I go to raise...

Turn signals and warning lights not working on John Deere 5520. Headlights working well lights not blown, and fuses appear fine ( although diagram in service manual does not match mine). Any thoughts?

hydraulic arms, lift but surge , you can hear the oil release . the traitor also surge to with the hydraulis

The pto has gotten weaker over time, seems like the clutches may need replacing.. is it a tough job? Just looking for suggestions

Have a JD 5520 with about 250 hours on it and it suddenly won't start. I found the sticky on here and have done everything listed. Every time I turn the key on, the 20 amp fuse for the fuel shut off solenoid blows immediately. The solenoid is good, tested it with a hot wire. Engine is primed and...

Hello, I am here hoping someone can help me repair my neighbors tractor. All of my equipment is old so the new stuff is a bit challenging for me. The problem we are having is that the tractor will not turn over. It has 12.35V at the battery, the shift lever is in the "Park" position, and I...

Has anybody on here had any experience with a 5520? I have been looking at them on tractorhouse .com?

We just replaced a fwd/neut/rev cable that was damaged on a JD 5520 with powrreverser transmission. The customer complaint before it came in for repair: Forward motion is delayed when using the hand control on the reverser. We found and replaced the damaged fwd/neut/rev cable. We are still...

I have a 2003 John Deere 5520. I bought it used in 2005 with less than 800 hours and the clutch went out. I took it to the John Deere dealer in Harrisonville, Mo and the Service Manager told me that there was a deficit part and John Deere would probably stand behind it even through it was out...

My Deere 5520 with a QA loader is great but I couldn't use skid steer attachments with it without an adaptor. I thought about it for a few years and finally bought an adaptor. I didn't want to make one because of all the fab work required and the prospects of not getting it exact, which it needs...

I just serviced my JD 5520, looked to put the hours down and discovered that my hour meter no longer is working. I checked for loose wires and all fuses are good. Has anyone else had this problem? :anyone:

john deere 5520 no fuel coming out of injection pump fuel getting to pump ok i disconnected one line at a time from back of injection pump no fuel. disconnected fuel line from injectors one line at a time no fuel. im at a crossroad. tell me it,s not the injection pump

My 5520 brake pedal goes to the floor after the tractor really gets used hard and is good and hot. After it cools down a bit, the brakes are back. It happened twice. Once on a 20 mile road trip and last night after chisel plowing a few acres. I checked the owner's manual but it only tells you...

guys, what tractor do you compare to the john deere 5320 with cab @ air fwd. about 55 hp. I might like about 70 hp. with cab. and fwd. thanks much amberg

Hey all, I have found a john deere 5520 MFWD Cab, Loader, triple rear valves, good tires, with about 1,100 hours on it. I think I can get it for around 34,000. Does this sound like a decent deal? Any particular problems or issues I should be aware of with this model tractor. I know some 5520s...

Hey everyone, I was looking for some input. My neighbor has a John Deere 5520 and its stuck in 1st gear.

I am looking at a John Deere 5520 MFWD, a neighbor of mine has for sale. Tractor appears to be in good repair but there is one area of concern on it and was wondering if you guys have ever seen it before. On the front hubs, the black hub looks like the paint has been burnt off. Both sides...

I have a John deere 5520 and the clutch has started slipping really bad. The clutch plate was replaced by our dealership about 3 years ago. I have adjusted the free play a few times since and it helped but now even with adjustment the clutch will do nothing. Could this be because the cable has...

I have had repeated problems starting my John Deere 5520. Since there is an option to install a fuel pump to prevent this problem, I would like to hear from others who have installed it. Has it made a difference in how the tractor starts? Is it a positive accessory for the tractor? Are you glad...

I just got a 2001 John Deere 5520 cab/air and I'm having problems with the fuel gauge not working! :confused:

I am way over-due on a hydraulic oil change for my jd 5520. I've been using it to excavate for my new house and probably got a little carried away, trying to meet deadlines for my subs. The hydraulics are getting sluggish and a bit noisy. What all is involved in changing the hydraulic fluid?

I have a JD 5520 FWD and wonder how many bottoms I can pull. I have the option of either a three or four bottom JD145 semi-mounted plow available to me for purchase. My JD is 75 or so HP with 18.4-30 and 12.4-24 radials. I have four rear wheel weights total, a 285 lb front starter weight and...

Looking at a used one, anyone know of any problems this model has or things to be on the lookout for, thanks.

Is there any type of inlet screen on the supply line to the filter? Possibly in the bottom of the tank? I did not find any check valves in the line itself.

I'm planning on hardwiring a Vector 750 Watt Inverter in my JD 5520 in the next couple of weeks. We've been using the inverter with the battery clips for the impact wrench we keep in the cab when something breaks (Like the mower knives). It works awesome, its just when connecting the clamps it...

On a JD 5520 MFWD, is it necessary to drop the front transaxle to remove the oil pan. I believe the front drive shaft has to be disconnected and slid back to provide clearance; but can you just unbolt the oil pan and slide it out? Thanks for any help.

I have a JD 5520 and want to get a hydraulic toplink (top-n-tilt) for it. The question is, do I get one with a check-valve built in or does the tractor itself have a "check valve" built into it? I would think the cylinder would drift down on it's own but am not sure. Anyone have any experience...

I just bought this tractor and think I got a steal. Tractor has a 541 FEL, cab with air and am/fm/cd. Also got a Miller Bobcat 250 NT welder (with only 12 hours), a 2003 Mongoose 32' tandem dual with dovetail and ramps, a bucket, pallet forks, hay spears front and back, post hole digger...

Has anyone mounted a tool box on a John Deere 5520 wit a cab? I think I have an okay spot, but I'm thinking there's somebody out there with a better idea.

I may have a chance to buy a used 5520, shuttle shift, front end loader, turf tires, 800lb wheel weights, 2002 with 650 hrs. This tractor has been leased to a large company that I work for and the lease is about up and they are planning to get a new one. The finance company who has handled the...

Can anyone tell me what a JD 5520 MFWD, loader, cab, dual SCV, etc should cost? The JD dealership here quoted me a price of $48k. Seems too high? What is realistic? Thanks for your help.