john deere 5045d

Tractor only has 112 hours on it but 10ys old. I had bucket pointed down with most of the front weight on the ground trying to scrape dirt backwards, heard a "POP" and the control would only move the bucket very slowly the quit all together. I pulled all four cylinders and checked operation with...

I have a JD 5045D that I was starting and turning off a few times while fixing a tire. Suddenly, without changing anything, it won't start and the PTO engaged light comes on when I try to start it. PTO lever safety switch tests good and battery is fully charged. I'm confident it is a safety...

I am running a JD MX6 rotary cutter on my 5045D. Am I supposed to be able to fully shorten the toplink with all of the threads screwed fully in? As it is, I can not shorten the toplink enough so that the rear of the mower is a few inches higher than the front when lowered to mowing height. It...

my 5045d will not start I parked it and tried to start it the next day it turned over a couple different times and now will not do anything. I had lights on the dash until I put a new battery in it. I have 12.7v to the starter which was replaced a couple months ago, all fuses are good but when I...

my 5045d will not start I parked it and tried to start it the next day it turned over a couple different times and now will not do anything. I had lights on the dash until I put a new battery in it. I have 12.7v to the starter which was replaced a couple months ago, all fuses are good but when I...

Hi to everyone , new member here. I need help with my problem. I have a 2013 JD5045D. When trying to start, all I get is click click click, maybe 15-20 times before it engages the starter. I cleaned all connections , battery is good. The clicking comes from behind the Dash. It looks like a round...

Hi folks, I have a 2012 JD5045d, 450hrs. Gas gauge works when the tank is full, tach works when it feels like working. Sometimes that could be in the heat or cold weather. Ive bang on the dash, that is not helpful. For a JD with low hrs I was thinking we should get better life of these sealed...

My tachometer wouldn稚 work until the tractor had sufficiently warmed up. I recently performed the transmission/hydraulic oil interval and now the tachometer works perfectly every time. There was some water in the oil. Coincidence? Does the tachometer have anything to do with hydraulic fluid?

This weekend I was bush hogging my farm went and parked the tractor and shut it all off. I went back to start the tractor and when I turned the key the normal lights come on and when I tried to start it there was a click and all power was gone. I checked the battery and it is good plus it is...

I have a 2013 JD 5045D with 71hrs on it. I started the tractor and let it idle to charge the battery, I went to check on it after approx 30 minutes and the tractor had died. I noticed a fuel leak from the rubber hose coming from the tank to the filter, I replaced the hose and used a small 12v...

Hello, I have a JD 5045 and was wanting to get peoples thoughts on a 3 point 8' shredder. I currently use a 6' frontier shredder and it is needing work. I use this rig for a side business.. With the 6' shredder I have only lugged down the tractor once in grass that is overgrown and I hadn't...

Having some issues with 5045D, I've been looking at the Starting system wiring diagram (thank ya'll for posting) but still not finding the issue. This has evolved a bit but now something is just going to ground. Here are some of the things I'm seeing. Remove positive on battery and...

I have a 2010 5045D that the lift goes down slow. I've tried adjusting the rockshaft adjustment but it doesn't change it at all. It lifts up fine. It doesn't matter how heavy the attachment is.

Problem: Will not turn over (start). No click, but cluster lights and all other lights come on. Also blowing the 10a "start relay" fuse every time I try to start it. Battery good. I can jump the starter and make it turn over but something is keeping it from starting. Checked pto- not engaged...

Hello I posted this on another thread the other day but want to start my on. I tried to start a lady's tractor the other day here in Bryan tx it's a 5045 d. It was about 45 degrees and was really hard to start. I've driven it in the summer starts and runs great. Yesterday I started trying to...

My first post here or anywhere. I needed to replace my old JD 1070 but didn't want the new JD tractors with all the EPA baggage. Found a low hour 2013 5045D in Tennessee at a good price. Everything the seller said was accurate but what he didn't mention was the feature that requires the...

hi Sir i have 5045D John deere Tractor .. The problem is when i start the machine rock arm lift up slowly @ 500 or 600 RPM after one minute or try to lift up 2nd time it never rise up so i need to increase RPM to 1500 or upper after one hour work it hesitate to lift up .. i changed hydraulic...

Can anyone tell me the Horse Power rating for a 5045D model. Also if a 540 RPM PTO is standard. Can a 1000 RPM PTO be had in this model ? Thanks

Most tractor reviews on this site, or most places, are posted by users who just purchased their tractor. For you folks that have owned a John Deere 5045D (or one of the Pune-made 5 series) for a while how do you like your tractor now? Has it performed to expectations? Have you had very many...

Well, I finally found a little time to get back on here and follow up about my purchase. I recently pulled the trigger on a 5045D, 512 loader, bail spike, and a 6' Frontier brush hog. I got it all up to the farm and so far I have put about 20 hours on it. I'm very impressed with the overall...

Hello there. New to the forum from Texas. I just bought my first new tractor, a John Deere 5045D, with a 512 loader, bail spear and a 6' brush hog. I am currently waiting for the dealer to finish assembling it so I can go pick her up. My question for everyone is, does anyone have any dimensions...

Doing a little window shopping on the 5045d and 5055d (also looking at a MF 2615) and have a few questions. 1. Anyone using these tractors to make round bales of hay? 2. The independent PTO, can you feather it on or is it a sudden on - giving whatever is attached a nice jolt on start-up? 3...

I've got a 5045D john Deere 2WD that only has 98 hours on it. It's been working like a dream...until yesterday. I attempt to crank it.....and no ignition happens....it's almost as if I've got it in gear (or I dont have the clutch in)...but none of that is the case. It's out of gear, the...

I am looking to purchase one of these no-frills 2WD tractors. Are they more or less comparable in terms of operating features and reliability? JD seems to be heaviest, Kubota the lightest, with NH in between. Countries of origin India and Japan. Which one to go with, or in same series like...

09 5045d will not start

I stumbled upon this video on youtube of a 5045D from India with what appears to be a 4000 series MFWD front axle. Also has a neat looking dozer blade. My guess is it's not for loader applications though, probably wouldn't hold up to the 500 series loaders (looks like very few tractors have...

I'm getting ready to purchase a new tractor for our small farm and agricultural construction business. I'm not new to tractors by any means, but I'm becoming indecisive over this so I'm asking TBN for some insight. The two tractors I've narrowed it down to are as follows: Kubota L4600F (2wd)...

Hey guys, Been lurking on here for a while, but never posted. Just wanted to let everyone know that I sprung for a new 5045D Deere, ordered it on July 5th, and it apparently arrived at the dealer's lot last friday( the 13th, lol)...It was scheduled to be delivered to him on the 26th, but I'm...

Our Non-Profit horse park is in the market for a new tractor. Used for mowing, grooming arenas, snow removal occasionally. I have pricing on these tractors but do not know enough to make an informed decision. Any feedback is welcome.

Any help would be appreciated! This is for food plotting only, running a single shank subsoiler every couple of years (on hard Georgia red clay), a 5 shank chisel plow, disc harrows, a 2 row corn planter and a few other light duty things. The physical size of these machines is about as big as...

Hey guys, my first post here so bear with me. I was having one of the kids do what I thought was a simple job on one of my deeres today. Had him replacing the starter but he seemed to have dropped the bolt for the starter into the opening of the engine where the starter gear is. My question...

So I've read through all of the Pat's Easy Change threads that I could find here, but I still have not been able to answer all of the questions I have regarding using it on a soon to be delivered 5045D. The 5045D is Cat 2, and will be arriving with a box blade and cutter also setup for Cat 2...

I went to my local dealer today to price out a 5045D with the 553 Loader. According to what I have seen on the JD website, the MSRP for the loader should be $5780, and everything looks like it should be included for attaching it to the 5045D. According to the dealer, however, the 512 Loader...

I am about to buy a tractor. After many years of construction, I was around Kubotas and always liked them. I looked at a L3200 -L3400 and liked them. My grandfather, who died when I was 3 years old at the age of 72, I am 50, had the first tractor in 4 county's in the Texas Panhandle. It was a...

I'm a hydraulic dummy...:o What's the easiest way to add top and tilt to my 5045D (w/553 loader)? I did not opt for the joystick on my tractor, only the standard package. I'd like to be able to install myself. Is there a "plug and play"? Thanks!! I've searched, and all I do is get myself...

I would like to buy a 5045d with 553 fel located in South Central Ohio What price should I be able buy this tractor before rebates and taxes This will be my first new tractor I need some help, With the curtains of ignorance................... maybe we can pull it back and let...

Not to steel the title from bgl, but my new 5045D with 512 loader is due here next week. I found a high volume dealer that quoted $17,195 which is 14% less than list price so I made the plunge. Our daughter is coming to visit this weekend so I told him to wait until next week to deliver it...

I've been posing some scenarios here on TBN for a few days with some great responses and I'm getting a little closer to making a purchase. I'm hoping to get the same quantity and quality of responses on this question as my others. Okay this is a little bit of an apple to orange comparison...

It was recommended that I ask you guys this question: I'm thinking about putting a 512 loader on my 5045D. According to the specs, it should pick up the largest of hay bales. I understand the ballast and tip over issues, I'm just making sure the loader will actually pick up the bales high...

I know this is probably a strange question but... My old Massy MF150 diesel has side (horizontal) exhaust. It dumps toward the ground behind the axle. I never thought it was quiet until I got my 2009 5045D. That sucker is loud in comparison. I just found out that JD offers an optional side...

Brought her home tonite! What a machine! It's not my first tractor, but it's my first NEW tractor...:D

Fell in love with a 5045D yesterday. Dealer quoted $18,901.00 with 512 loader. Is this a good price? Do you think there is any negotiating room? I've never bought a new tractor before... I've owned many, but the latest model I own is a 1966 MF150! Jim in Texas