cub cadet gt 2550

  1. D

    Cub Cadet GT 2550, 2006 shaft drive, Can't get the cruise/parking brake to engage, only need another 1/16 on an inch to engage/lock on or cruise on

    What could be the problem causing this feature being out of adjustment? In fact thar is no way of adjusting any takeup....looking for suggestions.....Also on the hydro drive, thar is a lever for engage, uningage that is only attached to a spring plate and nothing going to the cast iron drive...
  2. bwmarine

    GT 2550 Hood

    My lawn tractor is about 10 years old and in excellent shape. This year the stand offs where the hood is bolted on all four either c racked or broken off. I imagine from the age of the plastic. Went online to buy a new hood... dang, they quit making them. Ended up buying a used one on ebay for a...
  3. W

    Can I use 24x10-12 on my gt 2550 that calls for 23x9.50-12

    I would like to put ag tires on my gt 2550 would 25x8-12 or 24x10-12 cause any problems for me. Thanks Bill
  4. R

    Cub Cadet GT 2550 Dies

    Cub GT 2550, with Kohler Command CH-670 engine, 250 hours. I replaced the fuel filter with the correct Kohler fuel filter, it runs great for a few hours, then dies like it's out of gas. Tank is full. Restart, then dies like out of gas again. Has new air filter. Engine air intake screen is clear...
  5. R

    Cub GT 2550 Kohler idle speed PART 2

    Thanks, guys, I found the engine manual, and I see the carb sketch. The idle speed screw is Item N on page 24, the Kohler one-barrel carb. My question is, 1WHERE IS THIS SCREW LOCATED? I cannot find it. I've removed the air cleaner, but I don't see the screw. I dont' think it would be buried...
  6. R

    Cub GT 2550 Kohler idle speed

    How do I adjust carburetor idle speed? Mine seems too high. Thanks.
  7. E

    Cub Cadet GT 2550 Brake and Control Pedals

    My daughter was mowing earlier this week, said she heard a noise, and the accelerator and brake pedals kind of came loose, hardly any acceleration at all. I took a look, and going from the diagram at http://www.cubcadetpartsnmore.com/uploaded/files/gt2550%20%20769-01479b.pdf, page 4, it looks...
  8. B

    CUB CADET GT 2550 SPEED

    I bought my tractor new,I took my tractor in for service just general tune up blade work and adjustment,when I got it back I noticed it was much slower than it had ever been,I know top speed is supposed to be 6 mph, but now its nowhere near that speed. I called the dealer and he said it would...
  9. GRB

    GT 2550 Transmission

    Hey Guys, Finished mowing today and shut mower off outside shop to cool down. When I went to restart, it won't crank, at all. Since I was tired and hot, I was just going to push it into shop, but appears transmission won't go into neutral. When I pull the trans disconnect lever out and push...
  10. tracter

    GT 2550 mowing deck

    Recently purchased a GT 2550 and have a query about the cutting height settings. To get the deck to its lowest I have to remove all the gauge wheels however the hangers to which they are attached are touching the ground. Consequently when you mow and turn they plough into the ground. The obvious...
  11. B

    Cub Cadet GT 2550

    Hello, I am new to Tractor By Net. I just purchased a Cub Cadet GT 2550, 2010 model year. It was a floor model left from 2010 and on sale. I have never owned a Cub Cadet product before and would be interested in hearing from other owners about the pros and cons of the model 2550. I have read...
  12. E

    WTB Drawbar for Cub Cadet GT 2550

    Looking for a drawbar for my 2007 Cub Cadet GT2550
  13. B

    Torn between Cub Cadet LTX 1050kw and GT 2550??

    Hello All, First I appreciate the advice and information on this site. I am in the market for a new mower and am torn between the CC LTX 1050kw and the CC GT 2550. I am mowing around 2 acres of bermuda and some field grass. In the front, we have a steep hill up and down the driveway and a...
  14. K

    Cub Cadet GT 2550 Hood

    I'm looking for a replacment hood for my 2006 GT 2550. A used one would due. Mine melted a couple years ago and I'm tired of the looks. Messicks has 'em, part number 759-04137A, but $268.00, yikes! Thanks, Kubo
  15. K

    2006 GT 2550 Hood Meltdown

    I'm looking for a replacement hood, CC party number 759-04137A. Does any body know where I can get one for a reasonable price? I'd settle for a used one. Messicks has them for around 268 bucks, yikes. kubo
  16. WhoDeyTJ

    GT 2550

    Hello all! First post here. I just purchased a GT 2550. I love this mower but I am a bit concerned. This thing runs extremely HOT! Is this normal? If I stop to get off and move something in the yard, the next day I have a brown spot. I had a Craftsman 42". Ran really bumpy. The GT 2550...
  17. GRB

    GT 2550 Review / Oil Change Valve

    Good Evening Gents, Just wanted to post a note about my Cub. Bought it new from an independent dealer in May 2006 so thought I would give my thoughts about it after two full seasons of use. The tractor frame and drive train are built like a tank. I mow about 2.75 acres of grass with some pretty...
  18. W

    JUST GOT THE GT 2550

    Hi Everyone I am brand new to this forum so forgive me if my post doesn't belong here......... Today is day 1 with the cub GT2550, We bought it from a reputable dealer here and paid 4310.00 with tax and a 5 year service contract..(gee should I have bought that??) it cost 395.00 We had a 3 year...
  19. R

    GT 2550 deck plugs up too fast

    Hi all, I've had my new 2550 ('05) since April. The biggest problem I've had is that the deck plugs up so doggone fast that it's exasperating! I'm mowing about 2.5 acres and the deck won't stay clean that long. It seems to pack the clippings right up under the deck -- after a while it will drop...
  20. G

    GT 2550 Blades

    I have a GT 2550. Looking for replacement blades. Part number in manual calls for 759-04047. Any x-ref to Gator blades or old Cub part numbers? Looks like this blade part number is new for the GT 2550.
  21. P

    Problem with gt 2550

    Can someone help? When I pull the pto knob the mower goes dead. It takes about three tries to get the blades to work. I have had the mower for one year and it has 12 hours on the meter. I love the mower once I get the blades to turn. I have checked under the deck and it is very clean.
  22. H

    Newby and my GT 2550

    Hello. This is my first post here. Been lurking in the shadows for a while. Well, in April ’05 I started looking for a lawn mower to replace my 16 Year old Cub Cadet 1020. The old Cub has served me well. It’s nothing fancy, 10 HP Briggs, 32” deck, hydrostatic, stamped frame. The local Dealer...
Top